Examples of 'bainite' in a sentence
Meaning of "bainite"
bainite (adjective) - relating to a specific microstructure in steel and other alloys. Bainite forms at intermediate temperatures and is known for its combination of strength and ductility
Show more definitions
- A microstructure of steel consisting of needle-like particles of cementite embedded in a ferrite matrix.
How to use "bainite" in a sentence
Basic
Advanced
bainite
Bainite is a structure contributing to increasing the strength.
This is to avoid generation of the upper bainite.
Bainite steel and methods of manufacture thereof.
Vickers hardness of bainite has an influence on tensile strength.
Bainite forms at temperatures where the parent.
Comparative tests of different bainite steels were carried out.
The bainite stabilizes the austenite.
Such grains become a bainite phase.
The amount of bainite is not particularly limited.
The steel strip is coiled in the bainite range.
Further bainite formation then proceeds in the coil.
Cr has a useful effect of guaranteeing the amount of bainite.
Bainite is composed of bainitic ferrite and iron carbide.
Martensite is harder than either bainitic ferrite or bainite.
The nature of bainite changes as the transformation temperature is lowered.
See also
Austempering to produce a ferritic bainite.
An upper limit of a bainite área percentage is not particularly set.
The metal structure obtained is substantially an annealed martensitic bainite.
Bainite includes bainitic ferrite.
Mo is an element that facilitates the formation of a desired bainite structure.
Bainite and a small proportion of ferrite may also be present.
The disadvantage with bainite hardening is the long process time.
Bainite and occasional ferritic regions may also be present.
Co accelerates bainite transformation.
This bainite hardly contains carbide and retained austenite in a grain.
The obvious fact that displacements occur when bainite grows.
Nano hardness of bainite and martensite was determined by a nanoindentation method.
The balance of the microstructure is constituted by bainite and optionally ferrite.
Upper bainite with cementite.
There can be observed areas of austenite in the form of strips of bainite.
Granular bainite must be distinguished from upper and lower bainite.
Amount of transformed austenite at the starting point of the bainite transformation.
Bainite without cementite.
A microstructure of the steel sheet is a mixed structure of ferrite and bainite.
Bainite is thought to play an i.
The average grain size of ferrite and bainite is a correlative factor.
Bainite in steels.
In the right quantity it also provides an acceleration of the bainite transformation.
The lowered start of bainite transformation allows the mechanical properties to be increased.
The microstructure may possibly also include bainite and residual austenite.
Bainite and martensite are unavoidable phases due to the nature of the process.
C is a required element when using bainite and martensite for structure strengthening.
The microstructure of the sheet according to the invention contains granular bainite.
It is difficult to quantitatively measure martensite and bainite of the steel having been cooled.
Plates of bainite can therefore be smaller than those of martensite in the same steel.
The final structure of the steel according to the invention is a bainite structure.
Bainite can essentially be regarded as martensite that tempers during the course of transformation.
Note that the cooling after annealing may cause partial formation of bainite.
The effect of the upper bainite on the cleavage fracture stress is also discussed.
A residual structure may be one type or two types of bainite and residual austenite.
