Examples of 'baking mould' in a sentence
Meaning of "baking mould"
A baking mould is a container used for shaping and holding dough or batter while it is baked in an oven
How to use "baking mould" in a sentence
Basic
Advanced
baking mould
The baking mould becomes extremely hot.
Mix all ingredients in the baking mould.
Grease a baking mould or several small serving.
Replace the dough in the back baking mould.
Lift the baking mould out of the machine.
Then place the finished dough in the baking mould.
Do not place the baking mould into water.
The heated baking surface may be a wafer baking mould.
Grease a baking mould or line it with baking paper.
Never attempt to remove the baking mould during use.
Fill the baking mould and bake the pastry.
Attach the kneading arm to the pin in the baking mould.
Never immerse the baking mould in water or other liquids.
This is obtained by the steam generated within the baking mould.
Put the ingredients in the baking mould in the following order.
See also
Put the baking mould into the machine and make sure it fits snugly.
Start a baking programme only when a baking mould is fitted in the appliance.
Pull the baking mould upwards and out of the appliance.
Never use the appliance without a baking mould or with an empty one.
Let the baking mould to cool down before removing the bread.
Do not start a baking programme if the baking mould is not in the appliance.
Remove the baking mould from the appliance before filling it with ingredients.
Always add the ingredients into the baking mould in the specified sequence.
Rinse the baking mould with warm water directly after removing the bread.
Check to see if the kneading paddle and the baking mould are correctly positioned.
I also think of a baking mould with a little flour that rises to the surface.
Check to see if the kneading blades and the baking mould are correctly engaged.
The surfaces of the baking mould and the kneading blades are coated with a nonstick coating.
Always use pot holders or oven gloves when removing the hot baking mould.
Place the muffin baking mould upside down on your work surface.
Add the thick batter to the centre of the bottom baking mould and close the.
Please rinse the baking mould and the kneading blades by hand.
Please operate the automatic baking unit only after placing the baking mould filled with the.
Clean the interior of the baking mould with warm water and a little dishwashing detergent.
Foldable stainless steel rectangular baking mould GEOFORME.
Remove the baking mould 4 from the housing.
Add the ingredients into the baking mould 7.
Please rinse the baking mould 4 and the kneading.
It could cause irreparable damage to the baking mould 4.
NEVER remove the baking mould during use.
Can the baking mould and kneading blades be cleaned in the dishwasher?
Clean the exterior of the baking mould 4 as well as.
Place the baking mould 4 slightly slanting on the drive shaft.
Wipe the exterior surfaces of the baking mould 7 with a moist cloth.
Ensure that no contamination from outside can adhere to the baking mould 4.
Never submerse the baking mould 4 in water or other liquids.
You can bake the following bread sizes with the baking mould 4.
Place ingredients into the baking mould 4 in the sequence specified.
Do not heat the bread maker for more than 5 minutes with an empty baking mould.
Always add the ingredients into the baking mould 7 in the specifi ed sequence.
You'll also be interested in:
Examples of using Mould
Show more
Then the mould should be removed gently
Mix all ingredients in the baking mould
You will mould yourself in our ways
Examples of using Baking
Show more
Place hazelnuts on a baking sheet in a single layer
If baking results differ from previous oven
Check that the baking tray is level
