Examples of 'balance shaft' in a sentence
Meaning of "balance shaft"
A balance shaft is a rotating shaft in an engine that offsets vibrations. It is used to reduce noise and improve overall performance
How to use "balance shaft" in a sentence
Basic
Advanced
balance shaft
An auxiliary balance shaft reduces engine vibrations.
Clutch rod shove setting balance shaft.
Removing the balance shaft also increases fuel efficiency.
The further gearwheel drives a further balance shaft.
The use of a balance shaft reduces this undesirable effect.
There was now no balance shaft.
A balance shaft on the bottom of the engine offset the primary dynamic imbalance.
The engine was also installed with a balance shaft to reduce vibration.
The impulse is given to an alternator which passes it further to the balance shaft.
The engine features a balance shaft to drive the oil pump and balance the crankshaft.
These three abutments are equidistant from the center of the balance shaft.
A balance shaft effectively reduces the vibrations typical of a single-cylinder engine.
This also contributed to the forged crankshaft and two balance shaft.
The balance shaft was also discarded, with the engine instead being rubber mounted.
It came with a six-speed gearbox and balance shaft.
See also
Each balance shaft has a driven sprocket ( not shown ) to which the chain is connected.
The primary internal changes are a 40 percent heavier crankshaft and revised balance shaft.
This engine features a balance shaft and an output of 31 horsepower.
Some larger single-cylinder engines have also used balance shaft systems.
It utilised a single balance shaft and a 6-speed cassette-type gearbox.
The C1 prototype engine was designed with perfect balance not needing a balance shaft.
The balance shaft 115 will be detailed referring to the following figures.
Three-cylinder models were equipped with an opposite-rotating balance shaft mounted in front of the engine.
The first balance shaft 30 is provided with a first driven gear 31.
These engaging grooves 62 are formed in the radial direction of the first balance shaft 30.
Namely, the engine 14 is provided with the balance shaft 115 for reducing the primary couple vibration.
This is a weight advantage over the I4 engine, which will need a balance shaft.
Rear suspension 1000mm; The overall balance shaft balance suspension, unilateral inclined outfit 4 riding bolt.
Unlike most other V6 layouts, 60 degree engines can be made acceptably smooth without using a balance shaft.
It features 120 degree crank throws and a counter-rotating balance shaft.
The annular recess 61 surrounds the outer periphery of the first balance shaft 30.
The compact 60 ° V4 is not perfectly smooth and needs a balance shaft.
You'll also be interested in:
Examples of using Balance
Show more
Adjusting the balance effects all sources
Balance the blade following the instructions
Adjusting the white balance manually recommended
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
