Examples of 'ball end' in a sentence
Meaning of "ball end"
ball end: This phrase often refers to the rounded or finishing end of an object, such as a tool, rod, or piece of equipment
How to use "ball end" in a sentence
Basic
Advanced
ball end
Ball end cutters are also supported.
Attach the ball end to the servo arm.
The linear actuator is fitted with a ball end.
Thread the ball end on the throttle pushrod.
Sometimes a string can break at the ball end.
Ball end for welding.
Thread the screw through the ball end and control horn.
Ball end would be better.
A rattling effect is achieved by striking the ball end against the palm of the hand.
Ball end fitting.
In preferred form, the outer end portion of the piston component includes a ball end.
The ball end is formed on an outer end of one of these two components.
You are free to the ball end of course, my friend?
The ball end of the mount snaps into the pivot plate that was just attached.
Naturally the closing plate 40 is removable so the ball end can be inserted.
See also
The position of the ball end on the arm is listed in the engine instructions.
It provides a means for restraining the end of the motor M ' opposite the ball end 98.
Attach the ball end to the carburetor arm using the hardware listed.
This end acts on the force transmission device 14 through a ball end 18.
Hexagon keys with ball end on the long arm and conventional ends on short arm.
First, as shown in Figure 4, the defective ball end is removed.
Ball end for welding - metric inside.
Then, put the ball end through the hole.
Ball end for welding - flat.
The exterior 32 of the pedicle screw ball end 28 is preferably contoured for easy grasping.
A ball end mill comprising,.
The interior of the pedicle screw ball end 28 forms a retention cavity 34, discussed below.
Ball end driver offers you an easy fastening in an up to 35 degree angle.
You are free to the ball end of course, my friend? Can come with me.
Ball end - round.
This comprises a ball end 3 and an accommodation 10.
The ball end of the new string with an end nipper or wire cutter Fig . 6.
A rod 40 defines a ball end that is movably received in the socket 38.
The ball end 3 is provided with a ball 4 joined to a rod 5.
The other ball end 26 is a closed blind end.
Install ball end of downrod ( A ) into opening of mounting bracket C.
Install ball end of downrod ( O ) into opening of mounting bracket A.
Thread the ball end 12-turns on the rudder tail gear pushrod.
Install ball end of motor assembly ( D ) into mounting bracket ( B ) opening.
Attach the ball end to the bracket using an M3 x 10 machine screw and M3 locknut.
