Examples of 'ball milled' in a sentence
Meaning of "ball milled"
ball milled - Refers to a technique used in material science where particles are crushed and blended together using a ball mill
How to use "ball milled" in a sentence
Basic
Advanced
ball milled
None of these compositions were ball milled.
The suspension may be further ball milled to uniformly disperse the ascomycin.
The milled product generally has the characteristics of a ball milled intermediate.
The contents of the jar were ball milled overnight to produce a coating composition.
Preferably the carbon black and metal oxide are ball milled together.
The mixture was ball milled for approximately 3 hours.
The glaze mixture is prepared after the frit was ball milled in the usual way.
Next, the properties of ball milled mixtures of natural and synthetic tetrahedrites are investigated.
In this process appropriate amounts of the respective components are intermixed and then ball milled.
Composition C was ball milled for two hours.
The ball milled gelatin had average size of 97 microns.
The fired product was then ball milled for 2 days.
The mixture was ball milled until the particle size was less than 20µm.
The slurry thus formed was ball milled for 3 hours.
The resulting slurry was ball milled in a polyethylene container with zirconia milling media, for 24 hours.
See also
Similarly, the pigments in diisopropyl dimerate are ball milled to the desired particle size.
Example 3 NaAlH4 was ball milled with addition of zirconium, added at a molar ratio of 4, 1.
The calcined powder was mixed with alcohol and was ball milled for 16 hours.
The resulting product was ball milled to produce particles of less than 50 micron diameter.
The ceramic jar was placed on a roller and ball milled at 40 rpm for seventy hours.
The slurry was ball milled for 3 hours and coated onto sheets of 100 mesh Inconel.
The cooled crystalline sodium silicate was ball milled to produce particles of less than 50 microns.
LiAlH4 ball milled with Mg was investigated by differential scanning calorimetry ( DSC, Perkin-Elmer ).
Forty pounds of this material were ball milled at the Union Process Company, Akron Ohio.
The resultant slurry is ball milled for about 2 to 6 hours to form a usable slurry.
This mixture was ball milled for 4 hours.
Type I cement is ball milled at a rate of 66 tons per hour.
The pellets were smashed and ball milled for 12 h to obtain a fine powder.
This material is wet ball milled for 2 hours to give a suspension of 50 % solids.
The cool amorphous sodium / potassium glass was ball milled to produce particles of less than 200 microns.
The mixture is then ball milled until 90 % of the particles are less than 10 microns.
Then it was ball milled for 15 minutes.
This formulation was ball milled for 9 hours and sieved with a 250 micron sieve.
The cooled DB-1 silicate was ball milled to produce particles of less than 50 microns.
