Examples of 'base of transistor' in a sentence
Meaning of "base of transistor"
The phrase 'base of transistor' refers to one of the three terminals of a transistor, a semiconductor device commonly used in electronic circuits. The base is responsible for controlling the flow of current between the other two terminals, the emitter and the collector
How to use "base of transistor" in a sentence
Basic
Advanced
base of transistor
Output terminal Vout is connected to the base of transistor T via an avalanche diode Z.
The base of transistor Q2 is maintained at a constant voltage.
Perturbations at the base of transistor Q3 to ground.
The base of transistor TR 2 is connected to a control terminal CTRL.
The midpoint of this dividing bridge is connected to the base of transistor Q 1.
The voltage at the base of transistor Q4 is high and the transistor is conductive.
This enables reducing or minimizing the thickness of the base of transistor Q 2.
The voltage at the base of transistor T6 must be low-ohmic to provide a constant clamp level.
The separated horizontal sync pulses HS are coupled to the base of transistor Q6.
The base of transistor Q 6 receives a turn-on control pulse to start a measurement.
The voltage developed on CX8 is connected to a sense terminal at the base of transistor Q1.
The base of transistor T2 serves as input for the output stage.
The output of the operational amplifier is taken through a resistance R3 to the base of transistor T2.
The base of transistor T2 is controlled by the output of the differential amplifier.
Oscillator RF is input to the base of transistor Q3.
See also
The input of the base of transistor T is decoupled by a decoupling capacitor Cd12 in series.
Resistor R3 is coupled to the base of transistor Qi.
A diode D1 coupled to the base of transistor Q1 prevents the base voltage from becoming excessively negative.
Reference voltage VREF is coupled to the base of transistor Q2.
The base of transistor T4 receives the unbalance signal Ve.
The reference voltage VREF is applied to the base of transistor T2.
The base of transistor 3 is fixed to a substantially constant potential V REF.
A resistor R2 connected between the collector and the base of transistor T.
The base of transistor T 4 is connected to the drain of a parasitic PMOS transistor T 3.
The control terminal B of this switch is connected to the base of transistor T3.
The base of transistor T7 is connected with the collector of transistor T9 and conversely.
Its emitter is connected to terminal C and its collector to the base of transistor T1.
The base of transistor Q2 is coupled to the base and to the collector of transistor Q4.
Capacitor C2 prevents dc interaction between the base of transistor T1 and the incoming signal.
The base of transistor 19 is connected to its collector.
Transistor T5 amplifies this saturation detection current and uses it to control the base of transistor T3.
The collector and the base of transistor 18 are connected.
The base of transistor pnp1 is connected to the collector of transistor npn1.
This reference voltage is applied to the base of transistor 14.
The base of transistor 2 is connected by a resistor 4 to the output of a control circuit 5.
Type is provided between the collector and base of transistor 27.
The base of transistor 4 is connected to a current generator 6 and to terminal 1 through a resistor 7.
Its collector is coupled through a series resistor to the base of transistor 312.
The voltage applied to the base of transistor 11 is then equal to + VA.
The base of transistor Q1 is electrically coupled to the other of electrical contact pads 156.
The current circulating in resistance 73a polarises the base of transistor 72 which also becomes conductive.
The base of transistor N 2 is connected to the drain of MOS transistor 20.
A horizontal oscillator and driver circuit 22 supplies a control signal to the base of transistor Q2.
Advantageously, over-driving of the base of transistor Q1 is prevented by a proportional drive technique.
The collector of transistor T3 is connected to the base of transistor T2.
Therefore, the base of transistor T1 is at a low level.
Point A is connected to the base of transistor 30.
Thus, the base of transistor Q2 acts as a voltage summing junction.
The emitter of transistor T5 is connected to the base of transistor T1.
This supplies the base of transistor T2, which also turns on.
You'll also be interested in:
Examples of using Base
Show more
Lock bowl onto base by turning clockwise
Base men by his endowments are made great
Hold match at base of desired surface burner
Examples of using Transistor
Show more
Do not perform transistor measurements on live circuits
Overcurrent at the brake chopper brake transistor
It only indicates if the transistor is operating or not
