Examples of 'base sheets' in a sentence
Meaning of "base sheets"
base sheets - Sheets that form the foundation or basis for something
Show more definitions
- plural of base sheet
How to use "base sheets" in a sentence
Basic
Advanced
base sheets
The product of this step is a roll of base sheets.
Some of the base sheets were converted into finished product.
Each of the physical properties reported are the average of two base sheets.
Towel base sheets were made using the wet crepe process.
Cap sheets or shingles are typically applied over the top of base sheets.
Both base sheets were slit into rolls in preparation for converting.
The physical properties of the base sheets and finished products were measured.
Both base sheets were gap calendered using the same gap settings.
The physical properties of the various base sheets were measured and compared.
Base sheets produced using an undulatory crepe blade were also chosen for converting.
The paper was made with conditions similar to those described above for the base sheets.
Tissue and towel base sheets were made on a pilot paper machine.
Table 9 summarizes the physical properties of the two base sheets.
The base sheets were also embossed using the technology of the current invention.
Thank you for choosing anodised aluminium base sheets from Polychromal Products.
See also
The base sheets were embossed to produce finished products having similar strength levels.
In particular, use of paper base sheets is desirable.
The base sheets were converted to a finished tissue product using a number of emboss patterns.
Thin layers of non-corrodable material are cladding the inner faces of the base sheets.
The base sheets were converted to finished tissue rolls using the Tl emboss pattern.
The physical properties of the slit base sheets are shown in Table 6.
The base sheets from this experiment were converted using the Tl emboss pattern.
The embossing conditions for the two base sheets are shown in Table 4.
Towel base sheets were made on a crescent-former paper machine.
The physical properties of the uncalendered and calendered base sheets are shown in Table 2.
The tissue base sheets were water formed and consisted of 3 layers.
The first of the ecological base sheets 40 FIG.
Each process converted base sheets at two penetration depths ( or nip pressures ).
For Example 17, the base sheet results are shown in Table XIII for calendered base sheets.
Two-ply tissue base sheets were made on a crescent former tissue machine.
The physical properties of the three base sheets are listed in Table 10.
The base sheets were embossed to provide finished two-ply towel products.
The physical properties of the towel base sheets are shown in Table 18.
The base sheets were produced using both a conventional ( square ) and an undulatory crepe blade.
Figures 47 and 48 illustrate tensile modulus and friction deviation of towel base sheets.
Each process converted base sheets at three or four penetration depths ( or nip pressures ).
The base sheets were converted to two-ply tissue using the differential depth emboss process.
The resulting tissue base sheets had the following analysis and physical properties,.
Base sheets were made using both a conventional ( square ) crepe blade and an undulatory crepe blade.
Single - and two-ply-weight base sheets were made using undulatory crepe blades.
Base sheets were in the homogeneous mode containing 35 % Northern softwood kraft and 65 % Northern hardwood kraft.
Results from similar base sheets made using a conventional ( square ) creping blade are also shown.
Base sheets were made from a furnish containing 35 % Northern hardwood kraft and 65 % Northern softwood kraft.
Examples of suitable base sheets are the reduced-elasticity sheets taught in U. S.
The base sheets and there specifications are set forth in the following Table 2.
Samples of the two base sheets were converted to three ply-products using two converting methods.
Tissue base sheets similar to those used in the example 3 were converted to 2-ply tissue.
Example 15 The base sheets were manufactured on a paper machine using foam forming.
The base sheets were creped using a fifteen-degree beveled creping blade at 20 % crepe.
You'll also be interested in:
Examples of using Sheets
Show more
Title sheets shall contain the following
Do not expose support sheets to direct sunlight
Sanding sheets are available in a variety of different grades
Examples of using Base
Show more
Lock bowl onto base by turning clockwise
Base men by his endowments are made great
Hold match at base of desired surface burner
