Examples of 'battery lid' in a sentence
Meaning of "battery lid"
A battery lid is a removable cover or cap that encloses and protects the batteries inside a device or container. It is designed to provide easy access for inserting or replacing the batteries while keeping them securely in place and preventing any damage or leakage
How to use "battery lid" in a sentence
Basic
Advanced
battery lid
Open the battery lid of the remote control.
Mount battery lock and close battery lid.
Slide the battery lid closed.
An arrow is marked on the battery lid.
Rejoin the battery lid and the screw.
The battery hole is provided with a battery lid.
Push the battery lid back onto the appliance.
Lightly push the silver battery lid on the.
Close the battery lid and tighten the screw.
Then close the battery lid.
Mount the battery lid again and tighten it with screw.
Insert the battery and close the battery lid.
Carefully open the battery lid with a flat top screwdriver.
Your model number can be found on a sticker by the battery lid.
Use force to open the battery lid or card cover.
See also
Make sure battery lid is always properly fixed with its screw.
Loosen the screw with a suitable screwdriver and take off the battery lid.
Always make sure battery lid is properly closed and fixed.
Inserting the battery Open the battery lid.
Open the battery lid and remove the battery for.
Open the IR receiver by sliding the battery lid on the back downwards.
Position the battery lid to the bottom of the housing and then push it upward.
Remove the screw, and separate the battery lid.
Open the sensor battery lid with a coin by turning counterclockwise.
Write down the code inside the remote 's battery lid.
First open the battery lid on the rear of the remote control.
To open the battery compartment, loosen screw and remove battery lid.
Lightly push the silver battery lid on the front down and open the battery compartment.
To open the battery compartment lid, press the latch and remove the battery lid.
Remove the battery lid by pressing gently on zone A and pushing the lid downwards.
To identify an exhausted battery, Push the knurled slide in the battery lid to.
Prepare Impact Device Open the battery lid and insert the rechargeable battery.
To identify a charged battery, Push the knurled slide in the battery lid to the.
Remove the battery lid by inserting ( and twisting ) a flat bladed screwdriver in.
Battery Replacement Kit including battery, battery lid and o-ring.
Then push the battery lid backwards and remove the 2 batteries.
Figure 3, NOAHlink and Battery Lid.
For this, remove the battery lid on the rear of the sensor.
Open the battery lid and remove the battery 1 for 10 seconds.
Turn the battery with the battery lid by 90 to the front and remove upwards.
Open the sensor battery lid with a coin, turning the coin counterclockwise.
Unscrew and open the battery lid, place a 9V block battery and put back the battery lid.
To open the battery lid 7 press on the latch 10 and fold the battery lid up.
To open the battery lid 3, press on the latch 2 and remove the battery lid.
Push the battery lid lever ( BATT ) to open the battery lid.
Pull the battery lid downwards fig . 1.
Pull the latch 11 of battery lid outward and open the battery lid 13.
To open the battery lid 8, pull latch 10 and fold the battery lid out.
You'll also be interested in:
Examples of using Battery
Show more
The battery icon flashes during charging
Danger of explosion if the battery is incorrectly replaced
The battery pack is probably completely empty
Examples of using Lid
Show more
Always remove the lid or put holes in it
The lid has a sealing ring inside
Never remove the lid during boiling
