Examples of 'battery post' in a sentence
Meaning of "battery post"
Battery post: A term typically used in the context of automotive maintenance or electrical engineering to refer to the terminal on a battery where connections are made
How to use "battery post" in a sentence
Basic
Advanced
battery post
Install the battery post covers included.
Check the polarity of the battery post.
The positive battery post is covered with a protective cap.
Connect power wire to the positive battery post.
Identify which battery post is grounded or connected to the chassis.
Disconnect the negative battery post.
Use the battery post covers and rubber boots supplied.
Place boot over battery post.
Battery post wrench Hand held drill w / assorted bits.
Another method is a plastic channel to receive a battery post or terminal.
The positive ( + ) battery post usually has a larger diameter than the negative ( - ) battery post.
Lift up on the cap to gain access to the positive battery post.
After cleaning, apply a coating of clear battery post protectant to terminals and cable connections.
Move the cable away from the negative battery post.
After cleaning, apply a coating of clear battery post protectant to the terminals and cable connectors.
See also
Connect one end of the jumper cable to the positive battery post.
Disconnectthe cable from the battery post indicated by a NEGATIVE, NEGor ( - ) first.
Replace the black boot so it protects the cable lug and battery post.
Disconnect the cable from the battery post indicated by a NEGATIVE, NEG or ( - ) first.
Position the RED terminal on the bolt of the POSITIVE battery post connector.
The terminal member 6 could be interconnected to the battery post by any other mounting means.
Then, standing away from the battery, remove the output clamp from the NEGATIVE battery post.
Positive battery lead to the positive battery post marked POS.
Connect the Positive ( red ) DC wire from the charger to the Positive battery post.
Negative battery lead to the negative battery post marked NEG.
Attach a piece of at least 3 " of AWG 6 insulated battery wire to the Negative battery post.
Connect the Positive ( RED ) battery clamp to the Positive battery post marked POS, P, + or red.
This time, though, with your meter 's black probe, touch the negative battery post.
Remove bolt / nut from each battery post.
Remove the protective cover over the remote positive ( + ) battery post.
Be sure to disconnect the cable from the ( - ) battery post before.
Connect the red ( POSITIVE ) output clamp to the POSITIVE battery post.
This fuse must be installed within 18 inches ( 45 cm ) of the positive battery post connection.
Attach a 24-inch ( minimum length ) 6 AWG insulated battery cable to the Negative battery post marked NEG, N.
Positive post ( marked POS, P, + ) usually has a larger diameter then the Negative battery post marked NEG, N.
You'll also be interested in:
Examples of using Battery
Show more
The battery icon flashes during charging
Danger of explosion if the battery is incorrectly replaced
The battery pack is probably completely empty
Examples of using Post
Show more
He was going to post them for the world to see
Post requirements by duty station and mission
One vacant professional post is under recruitment
