Examples of 'baud rate' in a sentence
Meaning of "baud rate"
Baud rate: a measure of the speed of data transfer in telecommunications and computing. It represents the number of signal or symbol changes per second in a data transmission
How to use "baud rate" in a sentence
Basic
Advanced
baud rate
The baud rate settings must be identical.
Getting and setting the baud rate.
Setting the baud rate and protocol.
Baud rate detection in serial data transmission.
Setting the baud rate on a serial port.
Use the fastest available baud rate.
Selects the baud rate of the device.
Baud rate selection for the serial port.
Framing error baud rate mismatch.
The baud rate is set via a code switch.
Automatically sets baud rate and node address.
Select the serial port its baud rate.
Four baud rate values are possible.
Programmed into baud rate registers.
Four baud rate values are available.
See also
Press to choose the baud rate.
Set the baud rate bits per second.
Address code and baud rate.
The baud rate can be changed.
Select the dome baud rate.
Select the baud rate from the list available.
Select the appropriate baud rate.
The baud rate or other transmission parameters are automatically set.
The data response may be unstable at the baud rate of.
Select the baud rate of the display device with.
Specifies the baud rate.
The baud rate is changed according to the following pattern.
The difference between baud rate and bit rate.
Baud rate is the number of symbol changes per second.
Configuration error in baud rate for communication with keyboards.
Baud rate is the number of bits of data transmitted per second.
Sensitivity has nothing to do with baud rate and timing.
Reduce baud rate if cable is longer than specified in the table.
I then attempted to change the baud rate by going to the.
The baud rate can be selected for the serial port.
The role of the second baud rate will be explained later.
The baud rate of one or more bus devices is not set correctly.
Is selected to show the image when the baud rate is small.
Set node address and baud rate via the corresponding parameters.
The correct serial port must be selected and a compatible baud rate.
Protocol and baud rate are shown due to the dip switch setting.
Which of these ranges is chosen may depend on the determined baud rate.
Set the identical baud rate for each node of the network.
Printing speed may become slower depending on the baud rate and combination of.
Note that the network baud rate is automatically determined by the terminal.
Such clock synchronization is used in synchronization in telecommunications and automatic baud rate detection.
The parameters for the baud rate of the device are described below.
The overall length of the bus cable does not correspond to the selected baud rate.
The instrument baud rate is displayed during the initial power up sequence.
All these possible values are then considered valid representations of the corresponding baud rate.
