Examples of 'be beveled' in a sentence
Meaning of "be beveled"
be beveled - Describes an edge or surface that is cut or shaped at an angle other than 90 degrees
How to use "be beveled" in a sentence
Basic
Advanced
be beveled
Very thick walls should be beveled outwardly.
The core may be beveled along the inner and / or outer boundary.
The edge of the substrate may thus be beveled.
The shaft may be beveled at any suitable angle.
In this case the edges do not have to be beveled.
The edges can be beveled or rounded.
The edge portion of the dressing may be beveled.
These grooves can be beveled to further facilitate the positioning.
The edges of the tablets may be beveled or rounded.
The padding may be beveled at the sides for increased comfort.
Heavy sections should be beveled.
The beak blades can be beveled or otherwise sharpened to provide cutting edges.
The inside of the land of the bottle may be beveled to assist in sealing.
Additionally, the edge of the second seal 52 near the aperture 56 may be beveled.
Wall below unit must also be beveled to assure proper tilt angle.
See also
Instead of the ends being rounded, they can be beveled.
The slot of a motorized reader should be beveled at its edges and should have.
The lower surface of the flap 26 can thus be beveled.
The shallow slit may also be beveled to facility entry of the blade support.
Mouth devices, which have an opening that can be beveled or lateral.
The needle 23 may be beveled to ease the puncture of the organ.
Other elements, such as hexagonal elements, may be beveled as well.
The piercing end of the needle can be beveled to facilitate puncturing the first stopper.
Opposite longitudinal edges 66 of the base flange 60 may be beveled.
The material hold-down must be beveled when the table is beveled.
The edges of the inner boundary 10 of the core 3 may be beveled.
Ends Usually plain, but can be beveled or by our choice.
This should be beveled to 450 on the tooth surface, following the scalloping of the gum.
As preferred embodiments, the precut line may be beveled or, alternatively, be stepped.
Beveled edge 50 may be beveled to any suitable angle, for providing maximal support to extension 48.
The edges of the rubber reinforcing pad must be beveled at an angle of approximately 45 ;.
The corners may be beveled provided a minimum 7-1/2 " flat surface exists on the top and bottom.
Further, the inlet ends 120 can be beveled or rolled outwardly.
Opposed edges of the face 138 can be beveled as depicted in Fig.
You'll also be interested in:
Examples of using Beveled
Show more
Create a beveled pattern arrow for webpages
And my edges have been rimmed and beveled
Create a beveled pattern bullet for webpages
