Examples of 'be flared' in a sentence
Meaning of "be flared"
be flared: This phrase is often used to describe a situation where emotions, tensions, or conflicts are intensified or escalated rapidly
How to use "be flared" in a sentence
Basic
Advanced
be flared
The observations suggest the disc to be flared.
The retracting member may be flared distally outwardly.
No waste gases from the stripping unit will be flared.
The guide may be flared towards the second end.
Drained gas can also be flared.
The collar may be flared in order to further discourage turbulence.
The flange will preferably be flared outwards.
This housing may be flared towards the free end of the stem.
Oil will be stored and offloaded and gas will be flared.
The mandibular incisor can not be flared to correct these two problems.
The lower extremity of the frame may present an opening out or may be flared.
The truncated cone is said to be flared because its surface is not flat.
The upper extremity of the frame could present an opening out or could be flared.
The end region can be flared outward to provide further resistance to migration.
By lowering pressure the retrieved gases can be flared off on site.
See also
Acid gas will also be flared during routine maintenance of the acid gas management system.
The distal end of the sleeve body may be flared radially outward.
The bottom can also be flared from the hip, or executed in a retro style.
The gas passing the through the second scrubber may be flared to atmosphere.
The lateral edges may also be flared out to further relieve potential high pressure points.
There would be no need to squeeze it, they must be flared.
The cover has a rim which may be flared to mate with the inward shoulder.
Non-condensable hydrocarbons will be flared.
Therefore, the said gases are to be flared off if additional compressor equipment is absent.
Alternatively, the end to be placed in the drink may be flared.
Dakota oil fields will be flared this year - more than enough to.
The other end of the flexible strip test cable 8 may be flared.
In this case, the ends can be flared out with respect to the narrower center.
For example, an engaging edge of one of the portions may be flared outwardly.
The top must be flared to at least 10 mm diameter.
This is not a commercial well, and the gas will be flared rather than captured.
Said cone can also be flared “ trumpetlike ” or be open-ended in shape.
Alternatively, the ends of the light conductors can be flared or flanged into the holes.
The channels 61 may be flared at the first edge 62 to make this easier.
They are led towards the line 14 in order to be flared off.
Finally, the holes should be flared with a drill bit large about 6 mm.
Flexible use of fuel ( can even use gas that would normally be flared as a by-product ).
These holes 4 may be flared towards the plate 20.
LPG mix returned from the well 14 may be flared.
The free edge of the skirt may be flared as illustrated at 28.
The tubular extension 166 may be uniform or may be flared.
Alternatively, the distal end may be flared open into a " cone " shape.
For better fixation of the stent, the crown 28 of the common body 20 may be flared.
Nostrils in Asians can be flared and wide.
AM0009, Recovery and utilization of gas from oil wells that would otherwise be flared.
The frusto-conical area 18 is arranged such as to be flared in the proximal direction.
Conversely, the inner tube could be flared to fit around the tip section 38.
The prosthetic valve stent 630 can also be flared at one or both ends.
Boil-off from storage tanks will be flared via a low-pressure flare stack.
However, the branch 4 may of course also be flared at its free end 4 A.
You'll also be interested in:
Examples of using Flared
Show more
Which has flared up into sacred fury
Since then civil strife has flared
It has a high flared and curved skirt
