Examples of 'be unscrewed' in a sentence
Meaning of "be unscrewed"
The phrase 'be unscrewed' is typically used figuratively to mean to be in a state of confusion, disarray, or disorder. It implies that something is not properly put together or organized, leading to difficulties or complications. It can also refer to a feeling of being mentally or emotionally disoriented
How to use "be unscrewed" in a sentence
Basic
Advanced
be unscrewed
A wheel nut can not be unscrewed or tightened.
Can be unscrewed without having to shave the head.
So the handle can be unscrewed for cleaning.
Some routers have aerials which can be unscrewed.
This can simply be unscrewed or twisted off.
The top of the coffin should be unscrewed.
The pin can be unscrewed with a screw driver.
All of your actions can be unscrewed back.
These could be unscrewed and the detonators removed.
Normally the drill chuck can be unscrewed by hand.
It must be unscrewed for disposal or sterilization.
The cleaning opening is to be unscrewed for this purpose.
These can be unscrewed a little to cover most of the eye.
The latter can then be unscrewed.
The nut must be unscrewed to permit airflow in either direction.
See also
This will loosen chuck so that it can be unscrewed by hand.
The clip can also be unscrewed in a conventional way.
This will loosen the chuck so it can be unscrewed by hand.
The bottom can be unscrewed to clean it with carbolic acid.
The chuck should now be sufficiently loose to be unscrewed by hand.
A cold barrel could be unscrewed for field exchange.
Does not steam and the safety cup can not be unscrewed.
The objective may not be unscrewed during cleaning.
The tear band must be removed before a top cap can be unscrewed.
The support wheel may only be unscrewed up to the marking.
Further fastenings with hinges and the back of the unit can be unscrewed.
Corrugated plates can be unscrewed and taken down intact.
It can be unscrewed and replaced with wired floors during the off season if required.
The pencil has to be unscrewed.
The legs can be unscrewed from the mounting bracket.
The Bluetooth antenna rotates and can be unscrewed.
Those have to be unscrewed and the whole piece has to be removed.
A plate covering the terminal block must be unscrewed and removed for access.
The cover may be unscrewed from the spout or otherwise disengaged.
Screw out extensions on hydraulic jacks must not be unscrewed past a safe specified limit.
The grip may be unscrewed and retightened to relocate the handle in the desired location.
It can not be unscrewed.
The Cap must be unscrewed and removed in order to fill the Boiler with water.
None could be unscrewed.
The anti-clockwise rotation enables screws or nuts to be unscrewed.
The needle can then be unscrewed from the threaded neck portion.
How to Change a Showerhead Most showerheads can simply be unscrewed from the shower arm.
The chuck can now be unscrewed and removed from the spindle by hand.
Figure F Normally the drill chuck can be unscrewed by hand.
The wingnut can only be unscrewed from the screw with lots of force.
To electrically connect the device, the cover must first be unscrewed.
The anchoring device can be unscrewed due to the presence of the bone thread.
However, with sufficient torque applied the stud can be unscrewed.
The jaw guide module may then be unscrewed from the first member.
These can be unscrewed using the AmbiSpanner provided, or long nosed pliers.
