Examples of 'beam intensity' in a sentence
Meaning of "beam intensity"
beam intensity: Refers to the strength or power of a beam of light, often used in the context of technology, physics, or lighting design
How to use "beam intensity" in a sentence
Basic
Advanced
beam intensity
Measurement of the beam intensity is therefore obtained by sampling.
It is also possible to minimize a over a range of beam intensity.
Device for stabilization of beam intensity distribution in laser scanners.
The changes are controlled by precise variation of beam intensity.
Beam intensity is determined by beam power and spot diameter.
Measurement of the incident beam intensity is not needed.
Controlling beam intensity in an ophthalmic fiber optic illumination system using rotatable plate arrays.
Lumen ratings can not be converted in maximum beam intensity.
Features beam intensity.
The space between proton bunches in the beams was halved to further increase beam intensity.
Diffused beam intensity.
The microfluidic system may have means of varying the light beam intensity profile.
Primary beam intensity.
Beam intensity and even speed and motion could be altered depending on the intended function.
The headlamps automatically adapt light beam intensity to external conditions.
See also
The beginning and the magnitude of depolarisation are in dependance with the laser beam intensity.
The reflected laser beam intensity is sent back to the photomultiplier.
Segmented TX detector for determining the scan beam intensity profile.
The resulting beam intensity will still have a Gaussian profile.
However, it may be noted that part of the beam intensity is lost.
The incident beam intensity was monitored with a split ion chamber with a constant purge of He.
However, indirect drive is less sensitive to variations in beam intensity and hydrodynamic instabilities.
The beam intensity is measured at the output of the particle accelerator ;.
The changes in the first light beam intensity are sensed by the light sensors.
The greater blackening of the film, the greater the attenuation of the beam intensity.
The treatment planning system optimizes the beam intensity distribution to achieve maximally this goal.
The second force, called the gradient force, is directed along the beam intensity gradient.
Therefore, only the center beam intensity modulation will be processed by the light detector.
The sensor can be used for real-time control of the beam intensity and dwell time.
If the overall beam intensity has changed, the beam current may need an adjustment.
However, led flashlights have typically demonstrated lower beam intensity than conventional incandescent flashlights.
The beam intensity is modulated by a rotating lead plate chopper with a frequency of 10 Hz.
Figure 4 is a schematic illustration of beam intensity and beam energy stabilization in gamma-gamma analysis.
Buys us some more shield time. The water attenuates the satellite's beam intensity.
On the other hand, the beam intensity varies from one driving mode to the other.
Far greater than imagined . The beam intensity is.
The beam intensity is measured 10 times more frequently in ionization chambers.
A usual laser source has a beam intensity distribution of a Gauss-function.
Buys us some more shield time The water attenuates the satellite 's beam intensity.
As in the previous variant, the pump beam intensity modulation induces resonance between Zeeman sub-levels.
The embodiment optionally provides for positive feed-back measurement of the beam Intensity.
Accordingly, the beam intensity also changes in a step-like manner.
Alternatively, the stream flow rate can be varied and the UV beam intensity kept constant.
The dose value and the beam intensity can be displayed on the monitor 300a.
We submerge the City, the water attenuates, the satellite 's beam intensity.
Commonly used in laser beam intensity modulation systems are devices called acousto-optic modulators ( AOMs ).
Partly transmissive mirrors couple out part of the beam intensity to beam intensity sensors 44a-c.
Forthese samples L was found to change from 90 to 18? m with decreasing beam intensity.
Gentry ( 1974 ) notes the problem of beam intensity required to achieve a specific level of discoloration.
As its name suggests, Linac2 replaced Linac1, which had a maximum beam intensity of 70 milliamps.
You'll also be interested in:
Examples of using Beam
Show more
They beam us up and cut us up with lasers
We are prepared to beam you aboard our ship
Beam them directly onto the bridge
Examples of using Intensity
Show more
Maximum intensity if all lamps together are lit
Burns with the same intensity as sunlight
Minimum intensity if either lamp has failed
