Examples of 'belt guard' in a sentence
Meaning of "belt guard"
belt guard ~ a protective cover or enclosure that is installed to prevent accidental contact with the moving parts of a belt-driven machinery or equipment
How to use "belt guard" in a sentence
Basic
Advanced
belt guard
Replace belt guard by reversing above procedure.
Air compressor provided with belt guard.
Firmly tighten belt guard bracket bolts.
Press button to raise belt guard.
Make sure the belt guard was not damaged.
Presence and proper adjustment of the belt guard.
Remove eight belt guard screws.
Pull belt guard out and away from unit.
Keep area clear for changing the belt guard.
Reinstall belt guard and screws.
Never operate machine with the belt guard removed.
Remove two belt guard mounting screws on pump head.
Do not operate drain cleaner with belt guard removed.
Adjust air compressor belt guard as necessary to eliminate chatter.
Remove the four screws from the belt guard.
See also
Replace the belt guard before operating the machine.
Remove screws from the back of the belt guard.
The belt guard provided must be installed on the unit.
Check ring guard and belt guard for damage.
Belt guard should not be making contact with flywheel or pulley.
Remove the front of the belt guard by disengaging the snaps.
Remove hex nut and washer from bottom of belt guard.
Reinstall the belt guard and tighten the lock handles.
Never operate the outfit with the belt guard removed.
Remove belt guard by removing hold down screws located next to motor.
Never operate the unit with the belt guard removed.
Make sure that the belt guard is secure before using the machine.
Never operate the compressor with the belt guard removed.
The belt guard should be removed only when the compressor power is disconnected.
Loosen but do not remove the four belt guard mounting screws.
The belt guard protects the operator from rotating sheaves and belt.
Do not use the unit with the shrouds or belt guard removed.
The front belt guard can now lifted up and away from unit.
Lift the frame and bring the belt guard against your chest.
Make sure and leave adequate room to fully open the belt guard.
Do not allow the belt guard to contact the drive belt or the motor pulley.
Check the tension on the belts and close the belt guard door.
The belt guard should be removed only when the power to the compressor is disconnected.
Never operate the edger without the spindle sheaves belt guard in place.
Reinstall the spindle sheaves belt guard with the self tapping screws removed earlier.
The belt guard should be removed only after the spark plug wire has been disconnected.
This is the only time you should operate your compressor with the belt guard removed.
They also feature a black belt guard between the motor plate and the outside cover.
Unscrew the two Phillips screws and remove belt guard B.
Slow running pump and robust belt guard design guarantee less wear and improved cooling.
To avoid rattles or other noise, motor frame must not touch lower belt guard.
DO NOT operate this machine with the belt guard or blade guard removed.
Replace belt guard and secure with final 3 screws.
Rotor unbalance Rebalance Cooling fan hitting end belt guard Reinstall or replace fan.
Finally, replace the belt guard ensuring it is correctly and securely tted.
You'll also be interested in:
Examples of using Belt
Show more
I am wearing a belt of staples that go into my skin
I think there are actually whales on his belt
He had a belt tied around his neck
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
