Examples of 'belt tension' in a sentence
Meaning of "belt tension"
Belt tension refers to the amount of pressure or tightness applied to a belt in a machine or system. It is important to maintain proper belt tension to ensure efficient and reliable operation, as too loose or too tight of a belt can lead to performance issues or even equipment failure
How to use "belt tension" in a sentence
Basic
Advanced
belt tension
Belt tension is controlled by means of an automatic tensioner.
Tighten the belt tension nut securely.
Release tension lever to restore belt tension.
Check belt tension and adjust if needed.
During acceleration the belt tension is increased.
Precise belt tension lengthens service life.
Tighten hex nut to secure belt tension.
The belt tension is optionally adjusted accordingly.
Check and adjust belt tension frequently.
Engine speed is used to determine a belt tension.
This limits a belt tension during installation.
Roller and increase the belt tension.
Check belt tension and sheaves for wear.
Check the belts and belt tension.
Adjust belt tension or align couplings.
See also
During slewing the belt tension is low.
Belt tension rod is spring loaded.
The correct belt tension is important.
This sets the spring to optimum belt tension.
Check the belt tension again.
Rotate turnbuckle to obtain the correct belt tension.
Adjust belt tension until spring is extended to a length.
Make sure that the belt tension is right.
A correct belt tension prevents it from slipping or sliding.
Comprised of a cam or spring to maintain proper belt tension.
Release the belt tension as follows.
To adjust traction belt and auger belt tension.
Release the belt tension by removing the belt.
Transmission belts and belt tension.
Releasing belt tension with the idler pulley.
Crank for adjusting of belt tension.
Tighten belt tension lock handles.
Check for proper belt tension.
Release belt tension lock handles.
Acceleration of the carriage alters the belt tension.
Release draper belt tension fully.
The belt tension is controlled by the idler spring.
Check that the drive belt tension is adequate.
No belt tension adjustments are required.
Loosen screw holding belt tension spring to transmission.
Belt tension is too high.
Ruler for belt tension check.
A brief opening manoeuvre is then performed to release belt tension.
Ascertain that belt tension is appropriate.
This extends the spring for optimum belt tension.
Always use a belt tension measuring instrument during installation.
See the maintenance section for adjusting belt tension.
Drive belt tension should also be checked at this time.
Refer to the procedure for adjusting belt tension in this manual.
Check the belt tension required to transport the load.
You'll also be interested in:
Examples of using Belt
Show more
I am wearing a belt of staples that go into my skin
I think there are actually whales on his belt
He had a belt tied around his neck
Examples of using Tension
Show more
The tension between them was just wonderful
And constant shoulder tension creates a hunchback
Belt tension is controlled by means of an automatic tensioner
