Examples of 'bend radius' in a sentence
Meaning of "bend radius"
bend radius - This term is used in engineering and physics to describe the minimum radius that a pipe or cable can bend without causing damage or deformation
How to use "bend radius" in a sentence
Basic
Advanced
bend radius
Slide bend radius bracket into opening.
High flexibility and adaptation to small bend radius.
Mm bend radius provides more comfort during use.
Great for strain relief and maintaining bend radius.
Small bend radius duct cable.
Such a traverse could require a relatively small bend radius.
Small bend radius means great cable flexibility.
They help to provide proper bend radius support for cables.
Bend radius control element.
Another important issue for cable integrity is the bend radius.
Cable bend radius test.
They present locally and at their end a minimum surface bend radius.
Bend radius static mm.
This parameter identifies a recommended minimum bend radius for a given fiber.
The bend radius is calculated from the center of the hose in an arched position.
See also
Optical fibres must not be bent below a certain minimum bend radius.
By means of impulse tests this minimum bend radius is verified and adjusted if necessary.
Minimum bend radius is a function of the ductility and thickness of the material being worked.
The cable design should limit the bend radius experienced by the fiber.
Bend radius is the inside curve of the cable during and after installation.
Manufacturers specify a minimum bend radius to prevent kinks that would cause reflections.
The fibre unit radius at which this is first observed is the minimum bend radius.
By decreasing the minimum bend radius the tube can be bent more tightly.
The slope is chosen such that it respects the minimum bend radius of the fibre.
Ensure bend radius limits for cables do not exceed limits set by the manufacturer.
Curves in coax must not exceed the specified bend radius of the manufacturer.
It provides proper bend radius protection ensuring optimal cable radius preventing deterioration or breakage.
An arcuately shaped wall having the predetermined bend radius extends outwardly from the base.
This reduces the likelihood that the cable will be bent below the minimum bend radius.
The MBR is the minimum bend radius that the flexible pipe can accept without damage.
The storage trays usually include guide walls to maintain the fibers with a minimum bend radius.
Thus, a suitable bend radius must be calculated.
If the basal poles are oriented in the direction of the bend radius see Fig.
Further, a bend radius of the intake pipe can be increased.
The pulse can now be slightly longer because of the greater bend radius R b.
When application space is tight, bend radius is another important consideration.
Cables for Cable Chain with high mechanical resistance and minimum bend radius.
The bend radius of the optical digital connecting cable should be no less than 25 mm.
Test Methods Bending Radius Samples are evaluated to determine their minimum bend radius.
Bend radius calculations . But there are other factors that need consideration.
They are also extremely flexible, with a small bend radius.
A 3D pipe bending is a pipe bend that the bend radius is 3 times the pipe outside diameter.
For convenience, these sides should be measured to the beginning of the bend radius.
Typically, a minimum bend radius of approximately 40 mm is ensured.
Thus, the material will crack during bending if the bend radius is small.
Ensure that the bend radius is not smaller than 40 mm.
The rod 26 thus adopts the predefined radius of curvature or bend radius very accurately.
The bend radius shall be 5 mm.
Eliminating multi-layers guarantees a uniform bend radius across each conductor.
The bend radius of the curved section 60 is approximately 9 millimeters.
You'll also be interested in:
Examples of using Bend
Show more
Do not bend or twist the power cord
Be careful not to twist or bend the blades
Bend your knees and be stiff as a board
Examples of using Radius
Show more
Ideal blast radius for maximum casualties
He will want to be clear of the blast radius
And that radius is expanding every minute
