Examples of 'bendability' in a sentence
Meaning of "bendability"
Bendability is a noun referring to the quality or state of being capable of bending easily without breaking
Show more definitions
- The quality or degree of being bendable.
How to use "bendability" in a sentence
Basic
Advanced
bendability
The ductility was tested as bendability and twistability.
The bendability can be assessed by the bend angle.
To obtain full advantage of good bendability.
This is possible due to the bendability of the connection member.
This bendability has been obtained by the tip of the tongue being split.
These microcracks can be quantified by a bendability test at low temperature.
The bendability is important if you want to combine the solar cell with membrane architecture.
N forms coarse nitrides and deteriorates bendability and hole expandability.
The measured bendability and twistability for the corresponding maximum and optimized strength are reported.
N forms coarse nitride and deteriorates bendability and hole expandability.
The addition of Nb increased strength with a slight deterioration of bendability.
Elastic coating with good bendability combined with great hardness and excellent release properties.
It appears that some chemical additions improve the bendability of these alloys.
The DNA curvature and bendability were determined by migration on PAGE and by computer analysis.
This arrangement may also maintain a desired level of flexibility or bendability for the prosthesis.
See also
However, this asymetric bendability of the carrier is disadvantageous in certain other applications.
Our work consisted in showing the structural parameters which govern the bendability of these alloys.
However, it is possible to obtain excellent bendability as the effect except for economical efficiency.
The addition of Nb increases yield strength and improves bendability.
Similarly to elongation, enhanced bendability may be required of also a high-strength sheet steel.
This coarsens the martensite formed by the cooling, degrading the bendability.
Due to this heat treatment, the elongation and bendability are improved in some cases.
The interlabial device 20 should be provided with both compressibility and bendability.
Cold-rolled steel sheet having excellent bendability and method for producing the same.
This not only render axial shortening or lengthening possible, but also improves bendability.
In drawn and tempered material, both the bendability and twistability are varying without a clear tendency.
Accordingly, local deformability such as hole expansibility and bendability may be improved.
Bendability, The disclosed aluminum alloys display high bendability.
According to such a steel sheet, satisfactory bendability can be obtained.
This bendability is achieved, amongst others, due to the suppleness of said soft PVC.
However, minute cracking may occur and bendability is deteriorated.
On the other hand, fresh martensite becomes a fracture origin and significantly deteriorates bendability.
These lateral grooves 13 improve bendability of the tread portion B in the longitudinal direction.
However, it is not easy to attain both strength and bendability at a high level.
Bendability is an important parameter for e.g. surgical needles.
For example, the disclosed alloys unexpectedly display both high strengths and suitable bendability.
Furthermore, bendability is excellent Table 3 and Fig.
Generally, the more the strength of a steel sheet is increased, the more the bendability worsens.
Bendability was measured according to the procedure set out in the standard ASTM 290C.
The steel with only C, Mn and Si demonstrated the best bendability.
As a result, a higher bendability of the lower lip 40 is obtained.
As a result, high-strengthening causes deterioration in elongation and thus, bendability is worsened.
The bendability of second member 44 enables positioning and orientation of second member 44 in plane X-Y.
On the other hand, the residual austenite becomes a fracture origin, and thus, deteriorates bendability.
Bendability of a material may be tested in accordance with ASTM E-290.
Stent 319 may comprise any configuration to achieve the preferred amount of bendability and support.
The lower limit of r30 may be 1.10 to obtain further excellent hole expansibility and bendability.
Fig . 1 shows the effect of Mn content on bendability.
A 90 ° free V-bend with the bending axis in the rolling direction was employed for bendability characterization.
