Examples of 'bevel adjustment' in a sentence
Meaning of "bevel adjustment"
This phrase pertains to making changes or modifications to the angle or slope of an object or equipment, typically to achieve a desired fit or functionality
How to use "bevel adjustment" in a sentence
Basic
Advanced
bevel adjustment
Lower the bevel adjustment lever to retighten.
It may be desirable to adjust the bevel adjustment lever g.
Turn the bevel adjustment knob to retighten.
Remove the tool used to wedge the bevel adjustment lever.
Adjusting bevel adjustment and depth adjustment levers.
The joint shown has been made using either bevel adjustment.
Retighten the bevel adjustment lever.
Bevel adjustment bolt on rear of saw.
Retighten the bevel adjustment bolts.
Bevel adjustment for accurate cuts.
Loosen the bevel adjustment bolts.
It may be desirable to adjust the depth adjustment lever or the bevel adjustment lever.
Rotate the bevel adjustment lever counterclockwise to release.
Lock the bevel angle by pressing down the bevel adjustment lever before making a cut.
Push the bevel adjustment lever down and tighten securely to.
See also
ALWAYS lock the fence and bevel adjustment before cutting.
Return the bevel adjustment locking lever to the locked positioN . press down firmIy.
Your saw also features a adjustable bevel adjustment lever for consistent locking.
The bevel adjustment feature allows you to make bevel cuts up to 45º.
Then tighten bevel adjustment knob.
After adjusting your saw to the angle you want, tighten bevel adjustment lever.
Retighten the bevel adjustment by lowering the lever.
Using the other hand, lift the bevel adjustment.
Tighten bevel adjustment knob securely.
To set the saw for a bevel cut, raise the bevel adjustment lever F.
Retighten the bevel adjustment by turning the knob.
To set the saw for a bevel cut, turn the bevel adjustment knob F.
Loosen the bevel adjustment knob k.
Re-tighten the bevel lock and the lock nut securing the 0 bevel adjustment screw.
Tighten the bevel adjustment knob k.
Adjust the bevel adjustment lever by rotating it in the desired direction about 1/8 of a revolution.
Before making a cut, make sure the depth and bevel adjustment knobs are tightly screwed on.
Hold the bevel adjustment lever ( g ) and loosen the locknut ii.
Raise the lever or knob ( J ) to loosen the bevel adjustment and tilt.
Loosen the bevel adjustment knob at the front of the.
Loosen the locknut on the 45 Bevel Adjustment Screw.
Move the bevel adjustment lever to " lock.
To set the saw for a bevel cut, turn the Bevel Adjustment knob (B) counterclockwise to.
The bevel adjustment allows you to set the circular saw for bevel cuts from 0 to 50.
Retighten the bevel adjustment knob.
Lift the bevel adjustment lever ( H ) and tilt foot plate to the desired.
Adjust bevel angle ( Fig . 8 ) using bevel adjustment knob and bevel scale.
Raise the bevel adjustment lever ( g ) to loosen.
Loosen ( counterclockwise ) the bevel adjustment knob ( J ) and tilt.
Turn the bevel adjustment knob ( f ) to loosen.
Tighten hex nut and bevel adjustment knob securely.
Loosen the bevel adjustment knob ( 10 ) at the front of the saw.
The full range of the bevel adjustment is from 0 to 50.
Loosen the bevel adjustment knob ( 13 ) to unlock the saw shoe.
Attempting to make cuts without bevel adjustment knob securely tightened can result in serious injury.
You'll also be interested in:
Examples of using Bevel
Show more
The bevel guide has been factory adjusted
This is a combination of bevel crosscutting and mitering
Cuts bevel without tilting the torch
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
