Examples of 'bevel gear' in a sentence
Meaning of "bevel gear"
Bevel gear: A type of gear used for transmitting power between two shafts that are not parallel. Bevel gears have teeth that are cut at an angle, allowing them to mesh together and transmit torque. They are used in various mechanical devices, such as automobiles, industrial machinery, and power tools
Show more definitions
- A kind of gear in which the two wheels working together lie in different planes and have their teeth cut at right angles to the surfaces of two cones whose apices coincide with the point where the axes of the wheels would meet.
How to use "bevel gear" in a sentence
Basic
Advanced
bevel gear
Bevel gear pin sheared in top of leg.
This is the simplest form of bevel gear.
Spiral bevel gear with curved teeth.
The blade is driven by means of a bevel gear pair.
Spiral bevel gear with straight teeth.
Knob for blocking bevel gear.
In a bevel gear it is the diameter of the crown circle.
Effective face width of bevel gear.
The further bevel gear is connected to a drive pinion.
Virtual spur gear of bevel gear.
Bevel gear hobbing cutter.
Another suspect has to be the angle or bevel gear.
Slide valve driven by bevel gear and scotch crank.
Bevel gear cutting machine.
Driving input bevel gear.
See also
Bevel gear grinding machine.
Locating face of bevel gear.
For bevel gear lapping machines and other polishing tasks.
Dedendum of the bevel gear.
Bevel gear drive.
Root circle of bevel gear.
Bevel gear housing.
Root diameter of bevel gear.
Bevel gear planer.
Tip circle of bevel gear.
A bevel gear which mates with a motor driven bevel pinion.
Tip diameter of bevel gear.
A second bevel gear set is associated with the last gear unit.
Reference circle of bevel gear.
The first is typically a bevel gear set with or without hypoid offset.
Reference diameter of bevel gear.
The bevel gear is filled with the right quantity of grease at the factory.
Tooth depth of bevel gear.
The bevel gear is filled with the right amount of grease at the factory.
This can be achieved with a torque arm or a bevel gear.
Hypoid bevel gear.
Thoroughly grease the bevel pinion gear and bevel gear.
Regularly clean the large bevel gear and pinion gear.
The bevel gear is fixedly connected to the cylindrical sleeve supported by the bearing.
Horizontal bevel gear.
Each bevel gear is mounted on a shaft which extends inside the respective support arms.
Addendum of bevel gear.
Press the front bevel gear onto the drive shaft together with the bearings.
Facewidth of bevel gear.
A bevel gear is shaped like a right circular cone with most of its tip cut off.
Starting up the manufacture of big bevel gear pairs in an existing engineering workshop.
Rotation is produced by an eternal motor connected by means of a bevel gear drive system.
The first and second bevel gear sets have different gear ratios.
Mark the relative positions of the two gears in the bevel gear linkage.
This hypoid gear is a bevel gear that changes the direction of the drive rotation.
You'll also be interested in:
Examples of using Bevel
Show more
The bevel guide has been factory adjusted
This is a combination of bevel crosscutting and mitering
Cuts bevel without tilting the torch
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
