Examples of 'biaxial orientation' in a sentence
Meaning of "biaxial orientation"
biaxial orientation - A manufacturing technique in which a material is stretched in two different directions to align its molecules and improve its strength and other properties
How to use "biaxial orientation" in a sentence
Basic
Advanced
biaxial orientation
Biaxial orientation increases strength and clarity.
This with some biaxial orientation.
Biaxial orientation can be achieved by stretching a film biaxially.
The combination promotes biaxial orientation.
Polymers having biaxial orientation are especially effective.
Stretching in two dimensions will give biaxial orientation.
The result is biaxial orientation of the material.
Irradiation may be done on the primary tube or after biaxial orientation.
The use of biaxial orientation is preferred.
In many manufacturing steps an axial or a biaxial orientation step is used.
Biaxial orientation may be carried out sequentially or simultaneously.
It was then reheated to the draw temperature for biaxial orientation.
This biaxial orientation gives the containers a certain structural rigidity.
Thus the junction centres have slight biaxial orientation.
Biaxial orientation of flat films was carried out in two sequential steps.
See also
These films are submitted to a biaxial orientation in order to acquire heat shrinkability properties.
Biaxial orientation results from a stretching force applied in two directions.
Combinations of orientation conditions were tested to examine the effects of imbalanced biaxial orientation.
Such small degrees of biaxial orientation may enhance subsequent microfibrillation.
A tubular film is used as a starting material for the first biaxial orientation.
The biaxial orientation of the film can be a simultaneous or sequential process.
Preferably the tube is heated in hot water immediately before biaxial orientation.
The biaxial orientation may be obtained by any process known in the art.
Orienting treatment of the polyamide film may be either uniaxial orientation or biaxial orientation.
This simultaneous biaxial orientation may be done on either a flat or tubular film line.
When the stretching force is simultaneously applied in two directions biaxial orientation results.
The biaxial orientation can be carried out on a flat sheet or as a double bubble tube.
Specific techniques of biaxial orienting treatment include tubular biaxial orientation and tenter biaxial orientation.
Of course, the biaxial orientation is then also influenced.
This caused the primary film discharged from the extruder to delaminate before biaxial orientation.
The biaxial orientation is carried out simultaneously in both directions, by a simultaneous tenter frame.
HDPE films with differential biaxial orientation.
Monoaxial or biaxial orientation leads to a significant enlargement of the voids, especially cells and pores.
Advantageously, the polyester film employed has biaxial orientation.
Biaxial orientation effectively forms orientationally crystallized portions, thereby further enhancing the hydrolysis resistance.
Next, the unstretched film is biaxially stretched for biaxial orientation.
Examples of drawing methods include sequential biaxial orientation, simultaneous biaxial orientation and tubular biaxial orientation.
Then, the non-stretched film is biaxially stretched to achieve biaxial orientation.
The same ease of orientability in biaxial orientation was also observed as Example 3.
Thus, a modified tube can have a desired degree of orientation in both directions or biaxial orientation.
The biaxial orientation is fixed ( frozen ) by cooling the tube.
Obviously, as the materials employed change, the conditions of biaxial orientation will change.
The biaxial orientation obtained is fixed ( frozen ) by cooling down the tube.
This produces a container panel 86 with the desired biaxial orientation and visual transparency.
Biaxial orientation is generally carried out using, for example, the twin-bubble or tenter frame method.
In yet another embodiment, the coating can be carried out after biaxial orientation is completed.
The preforms were blown at biaxial orientation temperature to shape bottles having a capacity of 1.5 liters.
Preferably, the socket wall has circumferential orientation and the body has biaxial orientation.
The filter body may have a stored biaxial orientation in excess of 30 %.
The backseamed casing according to claim 16, wherein the heat-shrinkable casing film has biaxial orientation.
You'll also be interested in:
Examples of using Biaxial
Show more
Biaxial strain and variable stiffness in aponeuroses
Compare with the biaxial inverse of an eight
Biaxial orientation increases strength and clarity
Examples of using Orientation
Show more
Change the paper orientation to landscape horizontal
Orientation scales for backwards and forwards
The following two orientation categories are available
