Examples of 'bind mode' in a sentence
Meaning of "bind mode"
bind mode: This phrase is used in technology and refers to a state where certain settings or configurations are fixed or restricted
How to use "bind mode" in a sentence
Basic
Advanced
bind mode
Put your transmitter in bind mode.
Receiver accidentally put in bind mode so receiver is no longer bound.
Place the student transmitter in normal bind mode.
Another compatible transmitter in bind mode within range of the receiver.
Unit will begin flashing indicating it is in bind mode.
Put the transmitter into bind mode while powering on the transmitter.
Follow the receiver instructions to power the receiver on in bind mode.
Your transmitter was placed into bind mode and is no longer bound to your receiver.
You can accidentally unbind a receiver by inadvertently placing the transmitter into bind mode.
Enter bind mode on the slave transmitter following the instructions provided with that transmitter.
The throttle and throttle trim should always be at the lowest setting during bind mode.
HALFBACK ON bind mode is selected when using the Halfback binding.
The LED should blink to indicate the receiver is in bind mode.
With the receiver in bind mode Tap the Begin Binding button.
Select bind and press the scroll wheel to put the Transmitter into bind mode.
See also
If you entered bind mode correctly, you will see a solid LED within about 10 seconds.
Follow the procedures of your specifi c transmitter to enter Bind Mode.
Follow the procedures of your specific transmitter to enter Bind Mode.
The LEDs in each receiver should blink, indicating that the receiver is in bind mode.
This will put the master transmitter 's wireless trainer receiver into bind mode.
After 2 seconds the ESC will be in bind mode.
The control board LED fl ashes, indicating it is in bind mode.
The orange LED fl ashes, indicating the receiver is in bind mode.
The green LED will flash continuously, indicating the receiver is in bind mode.
The orange LED will flash continuously, indicating the receiver is in bind mode.
An LED on the receiver will flash rapidly, showing the receiver is in Bind mode.
The amber LED will flash continuously, indicating the receiver is in bind mode.
The orange LED on the receiver flashes, indicating the receiver is in bind mode.
The LED in the receiver flashes rapidly, indicating that the receiver is in bind mode.
Wait 10 seconds for the helicopter to enter Bind Mode.
The orange LED on the AR636 will begin fl ashing rapidly to indicate bind mode.
You'll also be interested in:
Examples of using Mode
Show more
Automatic mode should be selected in normal cases
We have even developed a secret mode of communication
Void mode transaction counter and total
Examples of using Bind
Show more
Let me bind that wound for you
I find sufficient evidence to bind this over
The bind she was talking about was complicated
