Examples of 'bind plug' in a sentence
Meaning of "bind plug"
A bind plug is a small device used in electronics and computer systems to connect or secure different components together. It is typically a small connector or jumper that is inserted into specific ports or slots to establish a connection or complete a circuit. Bind plugs are commonly used in computer motherboards, audio systems, and other electronic devices
How to use "bind plug" in a sentence
Basic
Advanced
bind plug
Remove the bind plug from the receiver.
Power off the receiver and remove the bind plug.
Remove the bind plug and store it in a convenient place.
Release the Bind button and remove the bind plug from the receiver.
Remove the bind plug from the bind port.
Pairing is done similarly to the pairing of receivers using the Bind Plug.
Bind plug is not installed correctly in bind port extension.
With the receiver off insert the bind plug into the BND port on the receiver.
The bind plug is not installed correctly in the bind port.
DO NOT remove the bind plug at this time.
Install bind plug in bind port and bind boat to transmitter.
Disconnect the fl ight battery, remove the bind plug and power the transmitter off.
Remove the bind plug from the receiver after binding is complete.
Switch off the receiver and insert a bind plug into the Ext . socket.
Remove the bind plug from the receiver and store it in a convenient place.
See also
Disconnect the battery from the ESc . Remove the bind plug from the receiver.
Please store the bind plug safely for the sake of repairing.
To bind a receiver, insert the bind plug in the BIND / DATA port.
Remove the bind plug from the receiver and power off the receiver.
With the receiver off, insert the bind plug into the BIND port in the receiver.
Put a bind plug in the BND / BAT port of the receiver.
With the receiver off, insert the bind plug into the BIND port on the receiver.
Insert the bind plug into in the receiver bind port and power on the receiver.
Install the bind plug in the receiver Bind port.
Insert the bind plug into the channel labeled " BIND " and switch on the receiver.
Insert the bind plug into the BIND / DATA port.
Install the bind plug in the receiver BIND / PROG port far left side of the receiver.
NOTICE, Always remove the bind plug from the receiver when the bind Process is complete.
Install a bind plug in the receiver battery / bind port.
Insert the bind plug into the BIND port on the receiver.
With the Bind plug installed, turn on the vehicle.
Remove the bind plug from the ESC / receiver unit.
Install a bind plug in the receiver Batt / Bind port.
Insert the bind plug in the BND / DAT port on the receiver.
Insert the bind plug into the receiver 's binding pins and power ON the ESC.
Insert the bind plug into the BIND/CH3 port of the receiver.
Insert the bind plug into the 2 pin bind port on the ESC / receiver unit.
You'll also be interested in:
Examples of using Plug
Show more
Plug the machine into a suitable outlet
Put the small plug in the appliance
Plug the charger into proper outlet
Examples of using Bind
Show more
Let me bind that wound for you
I find sufficient evidence to bind this over
The bind she was talking about was complicated
