Examples of 'bit holder' in a sentence
Meaning of "bit holder"
bit holder: A tool or container used for storing and organizing small pieces or bits, often in the context of hardware or construction work
How to use "bit holder" in a sentence
Basic
Advanced
bit holder
Fit the bit holder in the chuck.
To remove the bit and bit holder.
Use a bit holder at all other times.
Installing and replacing bit holder and bits.
The bit holder is released from the chuck.
Release the bit holder sleeve.
The screw is held by the magnetic bit holder.
Install bit tip in bit holder or install nutsetter.
Match locator to desired size nutsetter or bit holder.
Remove the bit holder from the chuck.
The wire bending hole is located on the bit holder.
The bit holder is then exposed and can be changed.
If it is hard to remove the bit holder from the toolholder.
Clean the bit holder next by blowing into it forcefully.
Pull the bit out of the magnetic bit holder.
See also
Rotate the bit holder until the clutch engages.
Align the symbol with dimple on front of bit holder.
Keep the bit in bit holder when not in use.
Screwdriver bits may also be inserted without a bit holder.
Pull bit holder straight out with pliers if it is difficult to remove.
Stick the screwdriver bits into the bit holder.
Use additional universal bit holder when using screwdriver bits.
Insert a screwdriver bit into the universal bit holder.
Check the bit or bit holder is locked on the machine by pulling it.
Use the other hand to remove the bit holder.
Hold the bit holder and pull it against the driver.
The shaft drops completely into the bit holder.
Insert the universal bit holder with a turning motion into.
Check the locking effect by pulling the universal bit holder.
Push bit holder into spindle turning until locked into position.
It also controls the direction in which the bit holder rotates.
Always use a magnetic bit holder when using short screwdriver bits.
Fit together the insert bit and magnetic bit holder.
The bit holder will return to its original position when released.
Push insert bit into bit holder until it snaps into place.
Remove screws holding the tool holder and the bit holder.
Remove the depth gauge and bit holder from the screwdriver.
Pull outward on the accessory to be certain it is locked into the bit holder.
The bit holder is magnetized and will hold most commercial drywall screws.
You can use an auxiliary tool to remove the bit or bit holder.
The magnetic insert bit holder functions to extend the bit in tight places.
You can remove the bit by loosening the nut on the bit holder.
This tool has a magnetic bit holder that provides convenient bit changes.
An auxiliary tool can be used to remove the screwdriver bit or universal bit holder.
Push new bit holder into spindle until ball lock snaps in groove in.
The drill may need an extended length bit holder for recessed or awkward locations.
Hold the bit holder firmly and pull back red sleeve toward tool.
Reverse the process by inserting the replacement magnetic bit holder into the tool.
Pull the bit holder out with pliers if you can not remove it by hand.
The bit can then be pulled from the bit holder and a new bit inserted.
You'll also be interested in:
Examples of using Bit
Show more
A little bit over my head right now
At least the baby puts up a bit of a fight
I was in a bit of a jam and he came through for me
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
