Examples of 'bits should' in a sentence
Meaning of "bits should"
bits should - an incomplete phrase that can be interpreted in different ways contextually, depending on the rest of the sentence or conversation
How to use "bits should" in a sentence
Basic
Advanced
bits should
Eight bits should be enough for anyone.
The remaining bits should.
The bits should be checked regularly.
Checking the condition of the bit The bits should be checked regularly.
Stuffed bits should not be confused with overhead bits.
Hence, the reliabilities corresponding to the parity bits should also be carefully considered.
The security bits should indicate the algorithm parameters.
After you follow all this instructions, your screwdriver bits should be as good as new.
The mortising bits should be sharpened only by a qualifi ed sharpening service.
Inspect bits regularly during use . Blunt bits should be re-sharpened or replaced.
Bits should be freshly greased and free from dirt and dust before use.
Tungsten carbide drill bits should always be used for concrete and.
In the fraction part, the non-significant low-order bits should be set to 0.
All other bits should be ZERO on output and ignored on input.
Here, bpp means a value indicating how many bits should be assigned for 1 pixel.
See also
HSS drill bits should always be used for drilling steel with a lower speed.
In order to satisfy Condition 5B, the tail bits should not be punctured.
The Digital Bits should know this even better than I do at this point.
Be aware that drivers for 64 bits should not be compatible!
Blunt bits should be re-sharpened or replaced.
Bit 0 with bitplane 0, etc. Any higher order bits should be ignored.
Worn / blunt bits should not be used as this condition contributes.
Checking the condition of the bit . ( WH18DBDL ) The bits should be checked regularly.
The bits should be free, and the excellent commercial services optional.
Normally, the ten bits should be deserialized.
The decode bits should be same value for both Port-B and Port-A.
SDS-plus tungsten carbide drill bits should always be used for concrete and masonry.
The 12 address bits should be the address of the slave.
As applicable, the data bits should include the parity or odd parity bit.
Stop bits should be 1.
You'll also be interested in:
Examples of using Bits
Show more
I got a couple of bits and pieces in my room
Bits and pieces come back slowly
Sprinkle the remaining bits of chocolate on top
