Examples of 'black test lead' in a sentence
Meaning of "black test lead"
This phrase refers to a type of electrical cable typically used for conducting tests or measurements in electronic circuits. It describes the physical appearance of the cable, which is usually black in color
How to use "black test lead" in a sentence
Basic
Advanced
black test lead
Measured and black test lead to cathode.
Black test lead for all types of signals supported by the instrument.
Connect the black test lead to this jack.
Permanently attached red test lead for positive ( + ) polarity and black test lead for ground reference.
Connect the black test lead to the terminal.
Connect the red test lead to “ VΩ CHz ” jack and the black test lead to.
Terminal receiving the black test lead as common reference.
The black test lead to the black socket of the Ohm range.
Connect red test lead to anode and black test lead to cathode of the diode.
And the black test lead to the cathode of the diode.
Mm safety socket for connecting the black test lead COM or ground socket.
Connect the black test lead to the negative side of the circuit.
Red test lead for positive ( + ) polarity and Black test lead for Ground reference.
Insert the black test lead into the negative COM input jack.
Insert red test lead to mV / / Hz-input and black test lead to the COM-input.
See also
Connect the black test lead to the COM jack and the.
Connect the red test lead to the Ω-jack [ 4 ] and the black test lead to the.
To connect the black test lead all measurement functions.
The Black test lead is used in the Common ( COM ) terminal for all tests.
Red test lead anode, black test lead cathode.
Plug the black test lead into your meter's COM terminal and.
Plug-in connector for the black test lead for all measurements.
Connect the black test lead to the COM jack and the red test.
COM input jack, Input jack for the black test lead for all measurement functions.
Plug the black test lead in COM and the red test lead in the + connector 11.
To be tested, and the black test lead to the cathode of the diode.
Insert the black test lead into the negative COM jack and the red.
Diods 's anode, and the black test lead is connected to the.
Connect the black test lead to the more negative side of the break ;.
During use connect the black test lead to COM jack and connect red test lead.
Plug the black test lead into the meter 's COM terminal and.
Connect the black test lead to the COM jack.
Plug the black test lead into your meter 's COM terminal and the red.
Connect the black test lead to “ COM ” socket.
Plug the black test lead into your meter 's COM-terminal and.
Connect the black test lead first, the red test lead second.
Insert the black test lead into the negative COM - jack.
Connect the black test lead in the COM-jack, and the red.
Plug the black test lead into yours meter 's COM - terminal.
Insert the black test lead banana plug into the negative ( COM ) jack.
Plug the black test lead in COM and the red test lead in V / Ω / mA /.
First connect the black test lead ( mass ) and then the red one ( + ) to avoid electroshocks.
Battery and the black test lead to the negative side of the 1,5V or 9V battery.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Lead
Show more
This would lead to better utilization of resources
But you gotta take the lead
Delay in treatment can lead to amputation or death
Examples of using Black
Show more
Disconnect the black negative clamp first
Black people hardly ever get lice
There were not any black people in my town
