Examples of 'blade control' in a sentence
Meaning of "blade control"
Blade control: In the context of sports or activities like knife throwing, fencing, or ice skating, it refers to the skill of maneuvering or directing a blade accurately
How to use "blade control" in a sentence
Basic
Advanced
blade control
This blade control mechanism is a safety device.
Disengage the blade control lever.
Rotor blade control based on detecting turbulence.
Stop engine completely by releasing the blade control.
Hold blade control against upper handle.
Reattach the left side of the blade control.
Set the blade control to close cutting.
Turn blades on with the blade control lever.
Ensure blade control lever is disengaged.
Lubricate pivot points on the blade control at least once.
Blade control rod and system of such rods.
Release the blade control lever.
Blade control is released or is not being held securely against handle.
Full pitch blade control.
The blade control must operate freely in both directions.
See also
Use cable ties to secure blade control cable to lower handle.
The blade control is attached to the upper handle of the mower.
Adjust by turning swivel at end of lever to lengthen or shorten blade control rod.
Hold the blade control bar against the handle.
Never attempt to start the engine with the blade control engaged.
Always release the blade control when starting the engine.
I am arresting you for assaulting an officer and violating the blade control law.
Release the blade control handle to stop the engine and blade.
Start the engine in the open air and operate the blade control lever.
The blade control handle must be depressed in order to operate the unit.
Lubricate pivot points on the blade control at least once a season with light oil.
The blade control handle is located on the upper handle of the mower.
Stand behind the edger and hold the blade control against the upper handle.
Blade control should be held securely against handle at all times during operation of mower.
Check to confirm that the blade control pivots freely against the upper handle.
Blade control handle and the brake cable at least once a season with light oil.
The cutting blade continues to rotate for a few seconds after the blade control is released.
Slowly squeeze the Blade Control against the right handle.
To stop the blades, release the blade control.
Make sure the blade control lever * is released.
Standing behind the mower, depress the blade control.
With the blade control lever disengaged, and the.
To stop the engine, release the blade control bar.
When the blade control is engaged, the blade turns.
With the engine off, engage the blade control lever.
Discharge cover, grass catcher, blade control or other safety protective devices in place and working.
Allow the engine to warm to operating temperature, and then engage the blade control lever.
The invention relates to a blade control rod, as well as to system of such rods.
Ensure that the engine stops within 3 seconds after releasing the blade control bar.
Standing behind the mower, squeeze the blade control handle against upper handle.
Rotor blades incorporating " variable geometry airfoils " for use in systems using individual blade control.
Standing behind the mower, pull the blade control handle back against the.
Karem has completed ground tests of a fully integrated hub, which incorporates individual blade control.
Finally, the most innovative concept was active rotor blade control technology by distributed actuation.
The blade control means can comprise a jack, whose piston is detachably integral with the blade.
You'll also be interested in:
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
