Examples of 'blade depth' in a sentence
Meaning of "blade depth"
blade depth: The measurement of how deep a blade can cut into a material. This is often an important factor to consider when using cutting tools such as knives, saws, or other sharp instruments
How to use "blade depth" in a sentence
Basic
Advanced
blade depth
Always keep correct blade depth setting.
Blade depth and bevel adjusting locking levers must.
Unplug tool before adjusting blade depth.
Allows resetting of blade depth to the previous cutting height.
Disconnect power cord before adjusting blade depth.
The saw blade depth is set correctly if the saw blade pro.
Always use the correct blade depth setting.
Blade depth lever must be tight and secure before making cut.
Set the blade to the correct blade depth setting.
Blade depth and bevel adjusting locking levers must be tight and.
You can set the correct saw blade depth as follows.
Tighten the blade depth and blade angle before making your cut.
The setting of the depth rod determines the blade depth.
Correct blade depth setting one blade tooth protruding below the material to be cut.
The depth adjustment is used to limit blade depth to cut grooves.
See also
The blade depth control lever is located on the right side of the upper handle.
Be sure to perform test cuts to ensure proper blade depth when cutting.
Blade depth and bevel adjusting locking levers must be tight and secure before making a cut.
You can do that with a circular saw if you can set the blade depth.
F Blade depth and bevel adjusting locking levers must be tight and secure before making cut.
The smaller the number, the shorter the blade depth.
With common profiles, the rotor blade depth will normally decrease linearly, in essence.
If this does not work, change the blade or adjust the blade depth see above.
Blade depth 42 shows a slight incline toward the shoulder of the tire in the profile shown.
If this does not work, the cut speed or blade depth may need to be adjusted.
The counter-holder is adjustable and allows for setting the saw blade depth.
The blade depth setting will determine the range of Tilt-Lok positions available for the application.
The smaller the number on the adjustment knob, the shorter the blade depth.
The correct blade depth is the “ key ” to easy cultivation.
The smaller the number on the adjustment knob, the shorter the blade depth will be.
If this does not work, the blade depth may need to be adjusted see page 15.
Depth rod, The setting of the depth rod determines the blade depth.
Rotate Blade Depth Indicator to align “ 0 ” with arrows.
Refer to page 4 for more information about setting the Blade Depth.
Depth Stop Screw - Turn the knob end to adjust the blade depth for cutting grooves.
See “ Adjusting Depth ” for instructions on adjusting the blade depth.
A grease fitting allows lubrication of Blade Depth Control ( EE ) screw.
If this does not work, change the blade or adjust the blade depth see page 17.
Printed on a ring around the Blade Holder Top are Blade Depth Settings, ranging from 1 to 6.
You'll also be interested in:
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
