Examples of 'blade guide' in a sentence
Meaning of "blade guide"
blade guide: A device or component that helps to control, support, or direct the movement of a blade or cutting tool. Blade guides are commonly used in various machines and equipment to improve precision, stability, and safety during cutting, slicing, or shaping operations
How to use "blade guide" in a sentence
Basic
Advanced
blade guide
The upper blade guide is spring loaded.
Check adjustment of the blade guide.
The height of blade guide needs to be adjusted.
Blade guide slot upon cleaning.
Raise upper blade guide fully.
Slide blade guide assemblies as close as possible to the material being cut.
To replace wear plate or blade guide.
Move the upper blade guide assembly up to its highest.
Put the blade into the groove in the blade guide.
Always adjust the blade guide close to the workpiece.
Loosen lock knob and raise or lower upper blade guide.
Oil the saw blade guide of your jigsaw regular.
Lubricate the slides of the sliding blade guide and the swivel.
Replace the blade guide insert when it is worn and replace.
The band saw is equipped with two adjustable blade guide assemblies.
See also
Set the upper blade guide to its lowest position.
Carefully release lever to prevent staples being trapped between anvil and blade guide.
The height of the upper blade guide needs to be adjusted.
The saw blade guide was designed to improve guidance of the saw blade.
Before adjusting the upper blade guide and saw table tilt.
Set the blade guide to the required height by turning the guide post adjusting knob.
Replace the bearings of the saw blade guide rollers at least once a year.
Turning the screw clockwise will move the blade toward the blade guide rollers.
Check the magazine blade guide if it will not close smoothly.
The depth of cut is the distance between the table and the upper blade guide.
Adjust the other blade guide bearings in the same manner.
The surgeon may also optionally choose the angle of the plane of the blade guide.
Lubricate the blade guide with light machine oil a bit.
First extract the blade from the pulleys and then from the blade guide bearings.
Adjust the saw blade guide after every saw blade change.
If required, use a scraper to clean the saw blade guide.
Damage to the blade guide bearings or rubber tires on the pulleys may result.
Completely Close the blade guide and do not.
In this instance, the rod which carries this counterweight acts as a blade guide.
Position the adjustable blade guide head as close as possible to the material being cut.
When your materials are very thick, work on a desk and using a blade guide if necessary.
That have collected in the blade guide with a flathead screwdriver or similar implement.
Turning the screw counter-clockwise will move the blade away from the blade guide rollers.
The quality with which the blade guide pivots are centered thus remains permanent.
A blade guide prevents the blade hitting, say, the concrete path next to your lawn.
Next, disengage the blade guide roller by moving.
Insert blade 2 with the central longitudinal hole over central blade guide 16.
To clean the saw blade guide slot use the scraper supplied with the tool.
Lubricate the slide, the vice, and the blade guide periodically.
Set upper blade guide 3 mm above the work piece.
Remove the blade, first from the pulleys, and then from the blade guide.
For this adjustment, the adjustable blade guide has to be at its left-most position.
Insert the knife blade either in the right-hand or left-hand blade guide mecha.
Clean the sword, the saw blade guide and the saw blades after.
Ensure that the blade rear edge is located and supported by the Blade Guide 14.
You'll also be interested in:
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
