Examples of 'blade shaft' in a sentence
Meaning of "blade shaft"
A blade shaft refers to the cylindrical or rod-like structure that supports and rotates blades, typically in machines or equipment designed for cutting, grinding, or other tasks. It enables the transmission of power from the motor or engine to the blades, allowing them to perform their intended function effectively
How to use "blade shaft" in a sentence
Basic
Advanced
blade shaft
Blade shaft will not turn.
Mount the clean blade on the blade shaft.
Blade shaft on the lower left.
Check that the blade shaft has not been bent.
Blade shaft and engine speed.
The blade member is incorrectly installed on the blade shaft.
Have the blade shaft replaced by an authorised specialist workshop.
They are used to adjust the height of the blade shaft.
Rotate the blade shaft until a blade can be seen.
Place the new blade onto the blade shaft ensuring the.
Place blade shaft onto center post in large workbowl.
Incorrect assembly of the blade shaft seal on the blade unit.
The blade shaft bolt should be inspected for proper tension.
Always have replacement of the blade shaft carried out by an authorised workshop.
Allow the blade to stop before removing materials wrapped around the blade shaft.
See also
The hollow blade shaft structure of different materials is different.
Ensure the blade unit including the blade shaft seal is assembled correctly.
Turn the blade shaft until one of the holes in the drive disc.
Make sure the flat side of the blade shaft seal is facing upwards.
Remove the blade shaft seal from the blending unit for cleaning if necessary.
Be careful to avoid damaging the surface of the blade shaft and the watertight seals.
Wait until the blade shaft has come to a standstill before putting the power tool down.
Do not operate your power tool with a damaged or bent blade shaft or motor shaft.
Always have work on the blade shaft carried out by an authorised workshop.
The machine must not be operated with a damaged or bent blade shaft or motor shaft.
Always have any work on the blade shaft carried out by a specialist workshop.
Use only blades marked with a maximum operating speed greater than blade shaft speed.
The planer blade and the blade shaft can become damaged and lead to increased vibrations.
Place the chopping blade into center of the work bowl over metal blade shaft.
Check the condition and firm seating of the blade shaft before using the machine.
Wait until the blade shaft has completely stopped moving before you put the device down.
Blade coupling Check and lubricate the blade shaft.
Carefully insert the blade shaft into the S blade.
DO use only blades marked with a maximum operating speed greater than the blade shaft speed.
Carefully remove S blade by pulling blade shaft straight up and empty workbowl.
The wind blade shaft is disposed on the wind blade frame ;.
Carefully place the mini S blade on blade shaft in bottom of workbowl.
Remove the blade shaft bolt by continuing to turn the bolt counter-clockwise.
Carefully place the Mini S Blade on the blade shaft in bottom of small workbowl.
With the blade shaft lowered, the blades should just be in contact with the turf.
Lever for lowering / raising the blade shaft.
Assemble the blade shaft seal correctly fig . x.
For example, zoom to the area around the blade shaft.
The angled-in blade shaft is a transport and storage position.
An integrated run-on brake reduces after-running of the blade shaft after switching off the machine.
Therefore, if the blade shaft is plastic, you may want to look at another model.
To maximize flush cutting capabilities, insert the blade shaft into the blade clamp with the.
Take off the fixing nut, cutter holder cap and holder washer from the blade shaft.
The flat side of the blade shaft seal should face upwards fig . x.
USE ONLY Blades ( H ) marked with a maximum operating speed greater than blade shaft speed of machine.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
