Examples of 'blade speed' in a sentence
Meaning of "blade speed"
This phrase refers to the velocity or rate at which the blade of a tool or machine moves or operates. It is typically used in contexts related to cutting, slicing, or grinding tools that have rotating blades, such as saws, blenders, or food processors. The blade's speed can affect the efficiency, precision, and safety of the tool's operation
How to use "blade speed" in a sentence
Basic
Advanced
blade speed
The blade speed should be kept constant.
Anvantage is a possibility of blade speed regulation.
May this blade speed you on your journey.
This source tends to dominate at low blade speed.
And the blade speed is equal.
A relatively small blade drag is opposed to the blade speed.
Saw blade speed can be smoothly adjusted electronically.
Tool can chatter or vibrate if blade speed is too slow at.
Blade speed may be adjusted to suit the material being cut.
Always adjust the blade speed to enable smooth cutting.
Maintain smooth advancement of tool without decrease in blade speed to avoid.
The highest blade speed generally gives best cut.
It is advantageous to be able to tailor the blade speed to part geometry.
Increasing of blade speed can not be accomplished in an unlimited manner.
Never use a sawblade rated with a blade speed lower than the machine.
See also
The blade speed can also be selected whilst you are using the device.
Tool can chatter or vibrate if blade speed is too slow at beginning of cut.
Adjust speed of cut to maintain smooth advancement of tool without decrease in blade speed.
The change in blade speed varies the length of the strands.
Test blades were jigged on a servo driven slide providing blade speed and positional control.
Choosing the proper blade speed is important for extending the life of the blade.
Follow the blade manufacture s recommendations regarding material and blade speed when choosing blade.
Blade speed to slow Inspect and repair hydraulic system.
The importance of cutting fluids increases with blade speed and toughness of the material.
Blade speed specifi cations must be at least as high as nameplate RPM.
Ensure that the maximum recommended blade speed of the blade is compatible with the machine.
The dial is conveniently located on the handle, allowing operator control of blade speed.
Do not use a blade unless the rated blade speed exceeds the saw no load speed.
The general rule is the harder the material being cut, the slower the blade speed.
Bevel gear designed for forestry use with high blade speed for best cutting performance.
Similarly, the blade speed used is a mean for the whole device.
The blender used had 14 buttons controlling agitation blade speed.
DO NOT exceed maximum blade speed shown for each blade size.
The blade speed is equal to the product of impeller diameter, π, and blade rpm.
You can regulate the pace - fast or slow - without affecting the blade speed.
May this blade speed you on your journey . Come on.
The doctor bladed film was deposited at a blade speed of 80 mm / s.
The surgeon selects a blade speed within this range by operating selector 6a Fig.
Blade speed was 100 RPM and the machine was not preheated.
With the motor running, turn the blade speed adjuster ( n ) to obtain the desired speed fig . 9.
Blade speed 3100 in and out movement / min These specifications are given as an indication only.
Table 1 Blade speed.
The blade speed should be kept constant fig . M2.
Thereafter, the blade speed was maintained at 30 rpm for an additional 30 minutes of mixing.
Thereafter, the blade speed was increased to 40 rpm for an additional 20 minutes of mixing.
You'll also be interested in:
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
