Examples of 'blades are not' in a sentence
Meaning of "blades are not"
blades are not: Phrase suggesting the absence or unavailability of blade-like objects or tools
How to use "blades are not" in a sentence
Basic
Advanced
blades are not
Cutter assembly blades are not sharp or are damaged.
Blades are not locked in place.
The main rotor blades are not properly aligned.
Blades are not covered by warranty against defect in material.
This is because a lot of razor blades are not needed.
The blades are not fixed to the fan.
The upper sections of the blades are not connected together.
The blades are not affixed to the unit.
Damages caused by cutting with blunt blades are not covered by the guarantee.
The blades are not designed to be sharpened.
Replaceable components such as chains and blades are not covered by the warranty.
The blades are not well seated.
Ventilation occurs when the propeller blades are not always fully submerged.
The blades are not installed properly.
Carry the hedge trimmer by the handle when the blades are not moving.
See also
Cutter unit blades are not sharp or are damaged.
Container is removed from the motor base and the blades are not moving.
Fan blades are not horizontal to ceiling.
Rolls and instant touches to the matt with blades are not considered as defeat.
The cutting blades are not depicted in the figures.
Put the blade cover on the shear blades so that the blades are not exposed.
The leaf blades are not variegated.
Static Rollover is a rolling action when the helicopter blades are not in rotation.
In particular blades are not mounted on the tension members.
However, the edges of these blades are not rounded.
The blades are not included with the product.
J Cracked or distorted blades are not to be used.
Die blades are not flush with the back of die.
Our forward overhead blades are not functioning!
The rotary blades are not sharpened in the same way as a conventional mower blade.
Non-metal grass cutting blades are not approved.
Sabre blades are not concerned.
In another embodiment, at least two blades are not parallel.
Check that the blades are not damaged or deformed before.
Bicycles, skateboards and roller blades are not allowed.
Stainless steel blades are not usually found in a commercial kitchen.
Scooters, skateboards and roller blades are not permitted.
The long blades are not pressed between support elements.
To accomplish this shearing action, the blades are not exactly aligned.
Ensure the blades are not cracked or damaged in any other way.
In addition, the heights and the configurations of the blades are not limited.
But these blades are not merely just for showing off.
Before starting the engine, make sure that cutter blades are not obstructed by.
The primary and tab blades are not metallurgically joined together.
In this case, the aerodynamic forces exerted on the blades are not very high.
Narrow blades are not suitable for cutting fast or with a traditional rolling action.
In contrast, if a thick strip is chosen, then the contact blades are not very flexible.
Make sure that the cutting blades are not in motion when the engine is idling.
Non-metal grass cutting blades, brush knives and circular saw blades are not approved.
Check that the cutting blades are not touching the ground or any other obstacles.
You'll also be interested in:
Examples of using Blades
Show more
Damaged or worn blades should be replaced immediately
Blades cut on the draw or back stroke
Mishandling of the blades may cause injury
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
