Examples of 'blower unit' in a sentence
Meaning of "blower unit"
A blower unit refers to a device or appliance that is designed to generate airflow or ventilation. It is typically used to regulate temperature, provide comfort, or circulate air in a space. Blower units are commonly found in HVAC (heating, ventilation, and air conditioning) systems, appliances like fans and air purifiers, and industrial machinery
How to use "blower unit" in a sentence
Basic
Advanced
blower unit
Place blower unit back into cabinet.
To convert dirt devil to a handy blower unit.
Place blower unit back into microwave oven.
Carefully pull out the blower unit.
The blower unit exhaust openings should match.
Do not pull or stretch the blower unit wiring.
Remove one blower unit mounting screw and.
The cabinet is mounted directly on the blower unit.
The blower unit can contain a dust filter.
The panels are attached to a blower unit.
Place the blower unit back into the opening.
An attendant must be on duty when the blower unit is in operation.
Remove two blower unit mounting screws and one.
Remove packaging material from inside the blower unit.
The blower unit is already in place and must not to be adapted.
See also
Connect duct work and electrical to the blower unit.
Carefully lift the blower unit out of the microwave oven.
Lift canopy and snap locking tabs into blower unit.
Remove one blower unit mounting screw and one blower.
Slide telescopic duct covers onto the top of the blower unit.
Secure the blower unit to the microwave with the screw.
This switch is located outside of the electrical box on the blower unit.
Air blower unit for a motor vehicle heating and ventilating system.
This switch is located inside of the electrical box on the blower unit.
Remove one blower unit mounting screw and one blower plate screw.
Place a block of packins foam under the blower unit to accomplish this.
The blower unit and grille should be installed after the finished ceiling is in place.
Screw mounting brackets onto left and right side of blower unit.
Some systems have one blower unit providing air to two electronic instruments.
Reroute the wires through grooves on other side of the blower unit.
Another object is to provide a blower unit which has relatively low noise emission.
The blower unit or units generate an airflow through the heater and the dryer.
For complete installation instructions see the instructions supplied with the blower unit.
Fit the blower unit housing inside the cabinet through the bottom opening.
The wires will extend far enough to allow you to adjust the blower unit.
Hang blower unit onto blower plate screws through the large part of the keyhole.
Make sure the insulation does not get into the ductwork or into the blower unit.
Inside the blower unit remove shipping block from blower assembly prior to use of appliance.
Make sure the lid contact closely to the blower unit and would not loose easily.
Hold the blower unit and the cover carefully when moving the product to prevent dropping.
You will then have access to the Blower unit.
Attach with one blower unit mounting screw and then one blower plate mounting screw.
DO NOT ATTEMPT to move rocks or sharp materials while operating Blower unit.
Remove the screws holding the blower unit and the screws securing the blower plate.
A blower unit of the type shown in Fig.
Always properly install the filter / cartridge into the blower unit.
A vacuum cleaning device comprising a blower unit according to any one of Claims 1 to 4.
NOTE, The blower unit exhaust openings should match exhaust openings on rear of microwave oven.
In a further embodiment, the epilation device has a blower unit and / or a suction unit.
Rotate blower unit 90 so the exhaust ports face the.
You'll also be interested in:
Examples of using Blower
Show more
Never use the blower in urban areas
The blower is a room of heat with no walls
Note for dual blower hood only
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
