Examples of 'blown dry' in a sentence
Meaning of "blown dry"
blown dry - Refers to a hairstyle that has been dried or styled with the use of a blow dryer
How to use "blown dry" in a sentence
Basic
Advanced
blown dry
The filtrates were blown dry under nitrogen.
I want my wife to get her hair blown dry.
The pellets were blown dry with nitrogen.
The substrate was then rinsed with deionized water and blown dry.
The mixture was blown dry with nitrogen.
You hate it when I get my hair blown dry.
The mixture was blown dry under nitrogen.
After rinsing, the tresses were blown dry.
The metal may be blown dry or dried in place.
After a bath, many birds love to be blown dry.
The cantilever was blown dry with compressed difluoroethane prior to use.
The tooth is then blown dry.
Slides were blown dry by a jet of nitrogen gas immediately after the water rinse.
The cartridge was blown dry with air.
Next, the mirror was rinsed with deionized water and blown dry.
See also
The rinsed samples were then blown dry with compressed air.
The chloroform layer was then dried with anhydrous sodium sulphate, filtered and then blown dry.
The column was drained and again blown dry with compressed air.
The slides were immediately blown dry with pressurized air and stored for hybridization.
The surface was briefly rinsed with distilled water and blown dry with nitrogen gas.
The main burner should be blown dry or heated to remove water from main burner.
Following a rinse in DI water, the emitters can be blown dry with nitrogen.
Next, the tip was blown dry with compressed freon.
The filter cake was washed with 10ml THF and blown dry with nitrogen.
The filter was blown dry with nitrogen for a minimum of 2 hours.
The substrate was placed into a carrier and blown dry using dried compress air.
The reaction was blown dry under a constant nitrogen stream for 16 hours.
The substrate is placed into a carrier and blown dry using dried compress air.
The filtrate was blown dry at 50°C under a gentle stream of nitrogen.
The substrate is rinsed in deionized water and blown dry by high purity nitrogen gas.
The mixture was blown dry under a gentle stream of N2.
The extract was separated and the filtrates were blown dry under nitrogen at 50°C.
The wet cotton applicator was blown dry for 30 seconds by using pressurized air.
Finally, slides were rinsed with deionized H2O and blown dry with N2.
The surface was then blown dry in a stream of Ar.
The extract was separated through Extrelut and the filtrates were blown dry under nitrogen at 50°C.
The filtrates were blown dry under nitrogen at 50°C.
The residue was dissolved in DCM ( 5 ml ), then blown dry once more.
The filtrate was blown dry under nitrogen at 50°C.
Spaces and drainage holes should be blown dry and sprayed with thin oil.
The filtrate was blown dry with nitrogen at 50°C.
Alternatively, the metal may be blown dry or dried in place.
The organic phase was blown dry under nitrogen at 50°C.
The film was then washed in p-xylene and blown dry with air at room temperature.
The film was then washed in p-xylene, blown dry with air at room temperature.
You'll also be interested in:
Examples of using Dry
Show more
Dehumidifier does not dry the air as it should
Let it dry completely before starting it up again
Dehumidifi er does not dry the air as it should
Examples of using Blown
Show more
The scout will be blown away tomorrow
I have blown off three weddings myself
Long flowing tresses blown in the breeze
