Examples of 'bobbin' in a sentence
Meaning of "bobbin"
Bobbin (noun): A spool or cylinder on which wire, thread, or string is wound for use in a machine or for hand-sewing
Show more definitions
- A spool or cylinder around which wire is coiled.
- In a sewing machine, the small spool that holds the lower thread.
- The little rounded piece of wood at the end of a latch string, which is pulled to raise the latch.
- A fine cord or narrow braid.
How to use "bobbin" in a sentence
Basic
Advanced
bobbin
Lift up the bobbin from the machine.
Bobbin thread appears on the right side.
Continue filling the bobbin until it is full.
The bobbin thread tension is too high.
Push down the bobbin presser arm.
The bobbin thread is caught in the hook.
Align the notch on bobbin to the spring on.
Wind bobbin thread onto these bobbins.
Start with a full bobbin and plenty of.
The bobbin thread has been threaded incorrectly.
To insert the bobbin case and bobbin.
The bobbin thread may be incorrectly threaded.
The yarn was wound on a bobbin after being irradiated.
The bobbin case is not inserted correctly.
Start machine again to continue winding bobbin.
See also
Insert bobbin and close slide plate.
Lint has collected in the bobbin holder.
Push the bobbin to the right against.
Trim thread end from top of bobbin.
Return the bobbin presser on your side.
Rethread the upper thread and bobbin.
The bobbin case is not correctly threaded.
The thread is wound loosely on the bobbin.
Clean the bobbin holder with a brush.
Lint has collected in the bobbin case.
The bobbin thread breaks bobbin case.
Dust has assembled in the bobbin housing.
Check bobbin winder and move it to left.
Hook replacement without dismantling of bobbin case.
Automatic bobbin winder with start up function.
The handwheel is pulled for bobbin winding.
Put the bobbin in the bobbin case.
Open slide plate and remove bobbin.
Set the bobbin on the bobbin winder.
Do not apply oil to the bobbin case.
Push bobbin winder stop t to the left.
Abnormal signal from bobbin winder shaft.
Push bobbin winder to right until it clicks.
When replacing the needle and bobbin.
Electronic bobbin thread monitor does not work.
The amount of thread to be wound on the bobbin.
Install the bobbin wound with thread.
Bobbin winder shaft is on the right side.
Take off bobbin and cut thread.
Bobbin lace with visible wire supporter.
A top loading bobbin system is so much better.
Bobbin then moves on to find the flock.
A feature of several digging sings is the bobbin.
Upper and bobbin threads should lock.
New thread path for bobbin winding.
