Examples of 'bolts holding' in a sentence
Meaning of "bolts holding"
bolts holding - refers to the structural components, such as bolts, that are used to secure or hold things together in place
How to use "bolts holding" in a sentence
Basic
Advanced
bolts holding
Remove bolts holding motor to the motor mount.
The chairs or seats normally have four screws or bolts holding them on.
Firmly tighten bolts holding loading wheel to handles.
How simple is this? One piece, another piece, bolts holding them together.
Remove bolts holding the planer to the stand.
The failure was caused by badly rusted bolts holding the bases of the towers.
The bolts holding the electric motor to the motor bracket are.
Loosen the two bolts holding the shoe.
The bolts holding the electromotor to its bracket are tightened correctly.
Now you may tighten down all the bolts holding the Corner Back assembly.
The bolts holding the gearhouse and motorbracket together are tightened correctly.
Usually, there are two bolts holding the starter in place.
The bolts holding it to the floor? Completely sheared off.
The spacer pieces receive the structural forces, the bolts holding the feed roller together.
Look for bolts holding legs and other parts together.
See also
As the name implies, this differential has 14 bolts holding on the differential cover.
Remove the four bolts holding the electric motor to the intermediate flange.
Remove both Burner Top assemblies, there are 3 M6 flange bolts holding each in.
They torch off the bolts holding the winch pack to the deck.
The bolts holding it to the floor?
One piece, another piece, bolts holding them together.
Remove the bolts holding the bottom of the window to the regulator on a horizontal channel.
Wheels are a three-piece design with 38 bolts holding motorcycle type rim to the flange.
Loosen the bolts holding the drive motor to the frame ; do not remove Fig.5.
The references 129 designate the bolts holding the cells together.
Remove the bolts holding the hinge on from the car body itself.
In our case, Andrew will torque the M12 bolts holding these steel jaws to 80 foot pounds.
Remove the two bolts holding the motor mount to the left side of the cabinet.
However, the thick bolts holding it shut were about to break.
In addition, the 12 bolts holding the low pressure compressor bearing housing were found loose.
Remove the retaining bolts holding the disc brake and lift away from the axle.
Remove the 8 bolts holding the return head in place.
To align correctly, the bolts holding the wheel bracket may have to be loosened.
Do not remove the 4 bolts holding the pressure housing onto the measuring tube.
Remove the 8 bolts holding the main inlet / outlet head.
Locate the two 10mm bolts holding the coil pack to the engine block.
Loosen the three M10 bolts holding the left support table to the table saw.
You'll also be interested in:
Examples of using Holding
Show more
Thanks for holding down the fort
Holding your steam generator in upside down
You are the one holding the dagger
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
