Examples of 'boost or cut' in a sentence
Meaning of "boost or cut"
This phrase typically refers to audio or sound adjustments. 'Boost' means to increase the volume or intensity of a certain frequency range, while 'cut' means to decrease or reduce the volume or intensity of a particular frequency range
How to use "boost or cut" in a sentence
Basic
Advanced
boost or cut
The high range you wish to boost or cut.
Boost or cut the level at certain frequencies to enhance the sound.
The faders can be used to boost or cut specific frequency bands.
This switches the frequency at which the MIDDLE control will apply boost or cut.
Each control can either boost or cut the amplitude of its frequency band by 15 dB.
Space for placing monitors against a flat wall 0 dB boost or cut.
You can boost or cut high-frequency sounds output from the front speakers.
The HIGH MID control allows you to boost or cut the upper mids.
It is possible to boost or cut the bandwidth of 4kHz or higher by ± 12dB.
Using the LOW MID control you can boost or cut the lower mids.
EQ KNOBS boost or cut the low, middle, or high frequencies by 15 dB.
When the knob is set to the center position, no boost or cut is applied.
It is possible to boost or cut the band of 4 kHz or higher by ± 17 dB.
Depending on the position of the pedal, this will boost or cut a specific frequency.
MID: adjusts the amount of boost or cut in the mid frequencies range.
See also
This allows for a total of 10 dB of boost or cut.
HIGH: adjusts the amount of boost or cut in the high frequency range.
The control has a shelving response giving 15dB of boost or cut at 12kHz.
All bands provide boost or cut of up to 15 dB.
The control has shelving response giving 15dB of boost or cut at 80Hz.
BASS: adjusts the amount of boost or cut in the low frequency range.
The LOW EQ control has shelving response giving 15dB of boost or cut at 80Hz.
BASS - This control allows you to boost or cut the bass level at approximately 50 Hz.
Use k / l to select the frequency and i / j to boost or cut the EQ.
KHz - This control allows you to boost or cut the high-midrange level at approximately 1.6 kHz.
Use / to select the frequency and / to boost or cut the EQ.
GAIN control, Use this control to boost or cut the level of the input signal.
This control allows high-frequency signals to be boost or cut by ± 10 dB.
The highfrequency response can be boost or cut by 6 dB, at a center frequency of 10 kHz.
The HIGH EQ control has a shelving response giving 15dB of boost or cut at 12kHz.
The mid-frequency response can be boost or cut by 6 dB, at a center frequency of 1 kHz.
Since it is a relative change parameter, it produces a boost or cut relative to a mid-point of 64.
The switch on the front baffle provides a boost or cut in the speaker 's high-frequency output.
The two-band equalizer enables you to boost or cut both high and low frequencies.
The LOW control allows you to boost or cut the low-frequency range.
The 12 o'clock position is ‘ flat ' with no boost or cut and a detent indicates this position.
