Examples of 'bore may' in a sentence
Meaning of "bore may"
bore may - This phrase is not a standard English expression and may be a typographical error or misinterpretation of another phrase
How to use "bore may" in a sentence
Basic
Advanced
bore may
Such a bore may be created by use of a drill.
Consequently the diameter of the bore may be smaller.
The bore may be an internally threaded bore.
The sidewall defining the bore may comprise at least one step.
The bore may be at least partially engineered.
Too high a temperature at the valve guide bore may result in thermal softening.
The bore may be provided with an inner sheath.
It will be appreciated that any other machined shaped bore may be alternatively used.
The upper bore may be threaded.
Each bore may contain tube sections or bar sections.
As in the preceding version, this bore may be polygonal in cross section.
The bore may be filled with a bone growth mixture.
In addition, the sidewalls of a central bore may extend outwards at a greater angle.
The bore may be a smooth circularly cylindrical or substantially cylindrical bore.
The drilling of the peg bore may alternatively be done separately.
See also
The bore may be sized and configured to receive the threaded member.
In each of the embodiments, the bore may make several turns within the block.
The bore may have the same diameter as the valve seat opening.
Furthermore, the bore may be threaded.
The first bore may include a first bore portion and a second bore portion.
In the embodiment of FIG . 7, the bore may not be a through bore.
The third bore may be radially centered about a third axis.
The shape of the bore may be cylindrical or conical.
The bore may have substantially the same diameter as the exit end of the channel.
The longitudinal bore may be configured to receive an endoscope.
This bore may be e.g. provided within a tubular extension of the piston member.
The inner surface of the bore may advantageously incorporate longitudinal grooves.
The bore may be created with a reamer, for example.
The piston defining a bore may have an associated force transfer member.
The bore may have drift diameter, corresponding to a drift diameter of the wellhead 50.
The position of the cross bore may be detected by a target means of known structure.
The bore may have a diameter in the range 4-8 mm.
The longitudinal bore may be centric or arranged off-center.
The bore may have threads for engaging threads of the rod 132 and / or fastener.
The shape of the bore may be circular, oval or any other shape.
This third bore may be drilled using said first and second bores as guides.
In other words, a smooth bore may be provided through the fluid storage apparatus.
The threaded bore may extend through the head portion into the bolt portion.
The closure 34 and the bore may allow fastening of the bayonet fastening type.
The first bore may extend through both the grip portion and the elongate portion.
The further bore may intersect the aforesaid bore.
The inner bore may have a non-circular shape in section, such as an oval shape.
This third bore may result in a screw-channel.
The first bore may have a suitable diameter, such as from about 5 mm to about 12 mm.
Such a bore may be threaded or non-threaded.
Also, one large bore may be provided in the rotor instead of two bores.
Alternatively, the bore may be smooth to receive a thread forming or thread rolling male fastener.
The threaded bore may be arranged in the stem 3 as illustrated in figure 6b.
Alternatively, the bore may be smooth to receive a self-rolling or self-tapping screw or bolt.
You'll also be interested in:
Examples of using Bore
Show more
Two large bore IVs wide open
I bore a child which died very young
And the women bore many children
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
