Examples of 'bottom cap' in a sentence
Meaning of "bottom cap"
bottom cap: The term 'bottom cap' usually refers to the cover or seal at the bottom of a device or equipment, such as in machines or electronic devices, that provides access for maintenance or protects the internal components
How to use "bottom cap" in a sentence
Basic
Advanced
bottom cap
Put on the bottom cap on the column.
A sealing ring is located in the bottom cap.
Replace the bottom cap on column.
Place bottom of gasket into the bottom cap.
Dispose of bottom cap immediately.
Twist and pull off bottom cap.
A bottom cap is removed and the column drains vía gravity.
Allow to dry thoroughly with bottom cap removed.
Screw bottom cap into the chute and blade cover.
Turn the screwdriver anticlockwise to release the bottom cap.
Remove the blue bottom cap at the base of the meter.
A brass electrode is connected to the outside of the bottom cap.
A separate bottom cap being located at the lower end of the tube.
Remove the top lid and the bottom cap.
Separate the bottom cap from the handle with a small flathead screwdriver Fig.
See also
Insert an awl or another pointed tool into the bottom cap of the.
Place Threaded Bottom Cap on Jar and turn it clockwise to tighten.
The container body is also open at the bottom to receive a bottom cap.
On the underside of the hot water chamber is a bottom cap that houses a coffee basket.
The outer basket is directly supported at its lower end by the bottom cap.
The device has a copper contact point in the bottom cap of the battery compartment.
The bottom cap was then removed to collect the flow-through solution.
The interengagement between the top cap and the bottom cap forms a sterile barrier.
Replace bottom cap and add the prepared sulfhydryl-containing sample.
Remove the top cap first and then the bottom cap from the column.
Each hermetic shell 28 is hermetically sealed by welding or brazing and may include a bottom cap.
Once the bottom cap assembly is prepared, the cartridge unit is ready for final assembly.
Inject within 5 minutes of removing bottom cap.
A small bottom cap fitting around said downwardly projecting small annular wall, and having air holes ;.
Filling, from below with dismounting of the bottom cap.
Remove bottom cap, Twist and pull bottom cap to remove.
When laying the washer on its back, hold the bottom cap down on the floor.
The bottom cap 28 therefore provides an indication of tampering.
Remove the top cap from the column, and then remove the bottom cap.
Cell 42 is borne by a cylindrical bottom cap 56 molded from an electrically insulating material.
An upwardly open blind hole 63 is provided axially in the body of the bottom cap 6.
Of course, the bottom cap 15 would also need to be pulled off the bottom opening.
Turn the handle 90 degrees and repeat until the bottom cap separates from the handle.
The bottom cap assembly includes a bottom insert 96 and the other one of the retainer caps 68.
Rotate the handle 90 degrees, and repeat until bottom cap separates from the handle.
The bottom cap 193 is then set aside for future use.
Use of the elastomeric material for top cap 14 and bottom cap 16 provides several advantages.
Next, the bottom cap was removed, and the tip was cleaned with 70 % ethanol.
Figure 16A is a top perspective view of a bottom cap.
Preferably, destruction of the bottom cap 28 is required to give access to the base structure 46.
Turn the screwdriver counterclockwise to release the bottom cap Fig . 9.
Top cap 14 and bottom cap 16 are identical, accordingly, only one shall be discussed in detail.
Turn the screwdriver anti-clockwise to release the bottom cap Fig . 9.
The bottom cap 21 of Fig . 3 could likewise be secured in a similar manner.
A base portion 3b of the sensor probe 3 is screwed into the bottom cap member 11.
