Examples of 'bottom head' in a sentence
Meaning of "bottom head"
bottom head: This term typically refers to the part of a screw or bolt that is threaded and is located at the end opposite the top, where it is screwed in
How to use "bottom head" in a sentence
Basic
Advanced
bottom head
A vertically adjustable bottom head support member is mounted on the car.
They are generally easier to tune as they have no bottom head to adjust.
The bottom head carries an annular wall, which is extending in an upward direction.
There had a second head growning up at the top of the bottom head.
Loosen the corresponding screws in the bottom head cover and remove that cover also.
An unheading car is horizontally movable into and from position below the bottom head.
The metal beads inside roll over the bottom head like water rolling over the shore.
Coke drums have a top head and a funnel shaped bottom portion fitted with a bottom head.
The bottom head is without nozzles and may be marked with an ADR-code.
A pressure detection sensor device mounted within the bulbous bottom head element to sense pressure.
The bottom head H can be connected to a conventional inlet tube or other piping ( not shown ).
The opposite pistons 3 each includes a bottom head.
The leading end of the bulbous bottom head element 32 may have any suitable shape.
If desired, place a second mic just below rim of bottom head.
In fact, the machine must be provided with a bottom head capable of being moved vertically.
See also
If desired, place a second mic just below the rim of the bottom head.
Methods for cleaning bottom head dome opening 52 are known.
The bottom head 14 has been removed and in not shown in the Figure.
Again, the shape or inclined configuration of bulbous bottom head element 32 enables this to occur.
The vessel bottom head 1b is made of a weakly alloyed high-strength steel.
FIG . 15 is a cross sectional view of the bulbous bottom head element of FIG.
The bulbous bottom head element 32 may be varied in its configuration and use.
Figure 14 illustrates a construction of the bulbous bottom head element or section 32.
The bulbous bottom head element 32 is cylindrical, although other shapes may be utilized.
Figure 17 illustrates another alternate feature of the bottom head element 32.
Alternatively, bottom head dome opening 52 may be cleaned with a flapper wheel or by honing.
A helical spring 26 is set between the bottom head of the piston member 23 and a fixed cup 27.
Bottom head assembly 22 includes a bottom head dome 44 having a plurality of stub tubes 46 welded thereto.
