Examples of 'brake chamber' in a sentence
Meaning of "brake chamber"
This phrase is commonly used in the context of automotive or mechanical engineering to refer to a specific component of a vehicle's braking system. A brake chamber is a device that converts compressed air or hydraulic pressure into mechanical force to engage the vehicle's brakes. It is an essential part of the braking system that allows for effective control and stopping of the vehicle
How to use "brake chamber" in a sentence
Basic
Advanced
brake chamber
Ensure that the brake chamber is depressurised.
The second section is the parking brake chamber.
Removing the brake chamber components.
Brake chamber push rod travel of reference test trailer in mm.
Installing the brake chamber components.
A first push rod is movable within a parking brake chamber.
Brake chamber pressure pe.
Follow the recommendations of the brake chamber manufacturer.
Brake chamber force.
Pressure in the brake chamber.
Other brake chamber designs may be approved upon presentation of equivalent information.
A second tap communicates the service brake chamber to exhaust.
This brake chamber can be advantageously arranged in the extension of the lower chamber.
Activate the parking brake if fitted with a spring brake chamber.
Each air brake chamber contains a pressure bleed valve and a push rod.
See also
Other drain plugs can remain in position in the brake chamber housing.
Ensure that the brake chamber seal is in the correct position and not damaged.
The force to achieve this operation is relatively constant irrespective of brake chamber size.
The brake chamber must be fitted or any protective parts that have a similar sealing function.
The nut is typically welded or staked to the exterior of the spring brake chamber.
Zero datum position of the brake chamber is to be taken as the non-pressurised position.
Put a knob of general purpose grease in the ball cup of the brake chamber lever.
Zero datum position of the brake chamber is to be taken as the non-pressurized position.
This invention includes a sensor which is incorporated into a stone shield in the brake chamber housing.
Brake chambers Before installation, ensure that the brake chamber is in its starting position.
Optimised sealing of the interface brake caliper/ brake chamber.
Note, All information regarding the brake chamber in this chapter relates to SAF-HOLLAND brake chambers.
If applicable, repeat this procedure for the spring brake chamber.
The brake chamber may be used on trailers of category O3 only.
Tighten both self-locking hex nuts in accordance with the information from the brake chamber manufacturer.
Each air actuated brake chamber 40 corresponds to an individual brake site.
Figure 5A shows the operation of the valve when the parking brake chamber is exhausted.
The brake chamber may be used on trailers of category O3 only . yes / no.
A similar opening 74 leads into the service brake chamber.
Ensure that the brake chamber ( A ) is depressurised.
Thus, in this condition, the air will not pass into the service brake chamber.
The brake chamber may be used on trailers of category O3 and O4 yes / no.
This relationship shall be determined for a brake chamber pressure of 6.5 bar.
Brake chamber piston 32 in turn is pivotally attached to a slack adjuster 33.
This relationship shall be determined for a brake chamber pressure of 650 kPa.
The oil pump is built-in as a single unit with the 26 Brake chamber.
In this respect, the need for a second air brake chamber e.g. assembly 59 is thereby eliminated.
Remove the two nuts ( E ) holding the brake chamber.
Check through the aperture in the brake chamber attachment flange for moisture / corrosion, see Fig . 26.
Reverse modulating valve 410 maintains a pressure in the brake chamber 41 FIG.
This provides clearance for removal and installation of dual brake chamber 31, such as for replacement.
Park brake solenoid valve 430 routes regulated pressure to brake chamber 41 FIG.
Push rod travel at 650 kPa brake chamber pressure.
Slack adjuster 33 provides for transfer of in-line loads from brake chamber piston 32 FIG.
ST Push rod travel at 6.5 bar brake chamber pressure.
You'll also be interested in:
Examples of using Chamber
Show more
But not chamber devoted to a hundred poisons
Drawings of combustion chamber and piston crown
In a chamber where it is necessary to wear a mask to survive
Examples of using Brake
Show more
Manual release of brake via actuating handwheel
Brake lining or brake pad method of attachment
Outside of the brake drum or brake disc
