Examples of 'brake resistor' in a sentence
Meaning of "brake resistor"
brake resistor: refers to an electrical component utilized in braking systems to dissipate excess electrical energy generated during deceleration or braking
How to use "brake resistor" in a sentence
Basic
Advanced
brake resistor
Integrated brake resistor without complicated wiring.
You have installed the submounting brake resistor.
Ensure brake resistor is not damaged.
The threaded bolts included with the submounting brake resistor.
Resistance rating of brake resistor is too high.
Brake resistor is not connected or it is damaged.
Retrofit frequency converter with brake chopper and brake resistor.
The brake resistor must be mounted outside the drive.
They do not protect the braking unit or external brake resistor.
Attach the bottom brake resistor to the mounting plate with the studs.
The screws and washers included with the submounting brake resistor.
Connect brake resistor to the power unit and activate the integrated brake chopper.
Another approach is to use two different types of material for the brake resistor.
The brake resistor is selected using the table and equations presented in this section.
The resistor includes a part or all of the brake resistor of the rheostatic braking chopper.
See also
The following formula can be used to define the power of the connected brake resistor.
Never use a brake resistor with a resistance below the minimum value specified for the particular drive.
Also the combination of two energy storages and the use of a brake resistor are investigated.
A brake resistor is connected across the DC bus.
Wrong setting might damage the AC drive or brake resistor.
A brake resistor power limit is used to condition the DC bus error signal.
Power in the DC bus can be dissipated in brake resistor by modulation of a switch.
A current sensor 7 is arranged in the connection between the switch 10 and the brake resistor 3a.
A dynamic brake resistor is indicated by DBR.
Furthermore, a standard material can be used for the brake resistor.
For this purpose, a brake resistor 3a is connected between the lines 6a, 6b vía a chopper arrangement.
The monitoring device is mounted in series with the brake resistor of the chopper ;.
A further brake resistor 3b is shown in Fig . 2.
Note, This is also the minimum allowed resistance for the brake resistor.
Integrated brake resistor ( PTC ).
Fig . 35 Wiring example showing Protective earth, Motor earth and Brake Resistor connection.
You'll also be interested in:
Examples of using Resistor
Show more
An external braking resistor can be connected if required
Resistor on the top of the protection cap
Integrated brake resistor without complicated wiring
Examples of using Brake
Show more
Manual release of brake via actuating handwheel
Brake lining or brake pad method of attachment
Outside of the brake drum or brake disc
