Examples of 'brake unit' in a sentence
Meaning of "brake unit"
A brake unit typically refers to a component or system used in machinery or vehicles to control or halt movement. It is responsible for reducing speed or stopping the motion of a machine or vehicle. Brake units are commonly found in automobiles, trains, industrial equipment, and other mechanical systems
How to use "brake unit" in a sentence
Basic
Advanced
brake unit
Replacing hydraulic brake unit or adjustment plate.
Brake unit for a fall arrest block.
Assemble brake unit to the hub.
Loosen the three fastening screws of brake unit.
Clutch brake unit with flange.
The slip clutch eliminates the need for a brake unit.
Brake unit assembly comprising.
Leading brake unit.
Spring brake unit and its application to a braking system.
Do not screw below these levels to avoid overloading the brake unit.
Fit new brake unit onto the motor shaft.
Do not screw to below these values to avoid overloading the brake unit.
A brake unit may be used to control the feeding speed.
A spring brake actuator is combined with the brake unit so far described.
The unidirectional brake unit may not allow repeated use of the straps.
See also
Please keep them handy and near to the clutch brake unit at all times.
Cooling of the brake unit is thus promoted despite the presence of the main cover.
Again this planetary gear is combined with a free wheel unit and a brake unit.
This gear change brake unit is of annular shape and surrounds the ring wheel.
Secure system with fire prevention device motor / brake unit.
The power brake unit is an additional part that operates with the hydraulic system.
A loss of pressure in the compressed-air brake unit can impair braking efficiency.
Brake unit assembly, whether or not equipped with an electronic parking brake, comprising at least.
Fig 3 illustrates a modified brake unit provided with an indicator device.
The actuator arrangement is designed in a modular fashion and comprises a saddle-type brake unit.
The tread brake unit is now back in its " released " condition.
Secure system, for fire prevention device motor / brake unit.
A brake piston 1 is axially movable in a brake unit cylinder comprising a housing 2 and a bottom 3.
Figs 4 and 5 illustrate a parking brake mechanism for a brake unit.
Push the brake unit into the desired position ( 2 ) and then tighten both screws firmly.
It could therefore be advantageous to combine the pitch motor 10 with a brake unit ( not shown ).
Optionally, the unidirectional brake unit allows the pulling band 192 to move solely in a downwards direction.
Correspondingly, an element can be, for example, a door, a step, a locking mechanism or a brake unit.
The unidirectional brake unit may comprise a slot through which the pulling band 192 passes.
The piston rod 11 is tubular and slidable on the rod-shaped member 5 of the brake unit.
The basic brake unit so far described is also shown in Fig . 2b.
Support means ( 50 ) for securing said brake unit to a non-rotatable member of said apparatus ;.
A brake unit for a rail vehicle is shown in section in Figs 1 and 2.
In both cases the respective brake unit 11 is provided with a parking brake lever 13.
A brake unit 200 is supported in the middle of the rear portion of the brake device 20.
Figure 3 is a front view of a brake unit used in the elevator shown in Figures 1 and 2 ;.
The brake unit 742 may be any combination of mechanisms configured to decelerate the vehicle 700.
A combined rail vehicle brake unit and spring brake actuator is shown in Fig . 1.
The brake unit 742 may take other forms as well.
In Figure 8 this brake unit is indicated by a block 61.
Power brake unit ( Brake booster ) and hoses.
A mechanical brake unit illustrated in Figures 4 and 5 is also mounted on the tractive-power motor 16.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Brake
Show more
Manual release of brake via actuating handwheel
Brake lining or brake pad method of attachment
Outside of the brake drum or brake disc
