Examples of 'branch circuit' in a sentence
Meaning of "branch circuit"
A branch circuit is an electrical circuit that branches off from the main circuit or power source. It is used to provide electricity to specific outlets, appliances, or equipment within a building or structure. Branch circuits are protected by circuit breakers or fuses and typically have their own dedicated wiring
How to use "branch circuit" in a sentence
Basic
Advanced
branch circuit
New construction and branch circuit connection.
The branch circuit wiring should include either.
If oven is used in a new branch circuit installation.
Each branch circuit supplies power to a number of outlets.
Connect neutral terminal to lead branch circuit.
Check main and branch circuit fuses or breakers.
Connect only to a dedicated individual branch circuit.
This makes the branch circuit relatively simple.
Adequate protection for the branch circuit.
Individual branch circuit serving only the washer is recommended.
Connect black leads to branch circuit black lead.
Individual branch circuit serving only your washer is recommended.
Connect white leads to branch circuit white lead.
Connect each plug to a receptacle that is connected to an individual branch circuit.
An individual properly grounded branch circuit or circuit breaker is recommended.
See also
This appliance must be installed on a separate branch circuit.
Make sure the branch circuit breaker is not tripped.
Connect neutral terminal or lead to branch circuit neutral in.
The branch circuit overcurrent devices shall be accessible only to authorized persons.
Connect to individual branch circuit only.
The branch circuit rating is shown on the nameplate for each model.
This unit should have a individual branch circuit.
Connect neutral lead to branch circuit neutral conductor in usual manner.
This may limit the length of a branch circuit.
Feeder and branch circuit wiring systems are designed primarily for copper conductors.
This is called a multiwire branch circuit.
Overloaded branch circuit wires will get very hot and can catch on fire.
The excess current is shunted by the branch circuit.
Restore electrical power to the branch circuit at the fuse box or breaker panel.
Connect the oven black lead to the branch circuit.
The branch circuit must have overcurrent protection in the form of a circuit breaker or fuses.
Consult a qualified electrician to ensure correct branch circuit conductor.
Smaller feeder and branch circuit conductor sizes to deliver the same amount of power.
Connect the oven red lead to the branch circuit.
The electrical power to the oven branch circuit must be shut off while line connections.
Be sure to take power from the special branch circuit.
Connect pump to its own individual branch circuit with nothing else on the circuit.
Make sure pressure washer is connected to an individual branch circuit only.
A sensor associated with the branch circuit breaker may be provided to obtain the current information.
Connect the oven black wire to the branch circuit.
Turn ON branch circuit breakers one at a time.
Connect the white lead to the branch circuit white lead.
Disconnect other electrical appliances from circuit or operate saw on its own branch circuit.
Full branch circuit protection with Siemens circuit breakers.
Plug the power cord into the correct branch circuit.
Check the AC branch circuit between all the microinverters.
Connect the oven red wire to the branch circuit red.
An individual branch circuit dedicated to your washer Your washer must be grounded.
The device can not be directly connected to the branch circuit.
The UPS requires a dedicated branch circuit that meets the following requirements.
You'll also be interested in:
Examples of using Branch
Show more
When cutting a branch that is under ten
Branch is one of those guys who just
A tree whose branch is wide and strong
Examples of using Circuit
Show more
Each electrical circuit corresponds to a track block
Circuit breaker has tripped due to an overload
A household fuse or circuit breaker has tripped
