Examples of 'brazed joint' in a sentence
Meaning of "brazed joint"
Brazed joint: A brazed joint refers to a type of joint made by joining two metal pieces using a filler metal that melts above 840°F (450°C) but below the melting point of the base metals
How to use "brazed joint" in a sentence
Basic
Advanced
brazed joint
During cooling it forms a solid brazed joint.
A brazed joint will last a life time and is proven to do so.
Thickness of filler metal in a brazed joint.
A brazed joint is typically sturdier than a welded joint as well.
The first hermetically sealed joint is preferably a brazed joint.
The brazed joint thickness varied with the applied load.
The joint is not as strong as a welded joint or a brazed joint.
The result is an inspectable brazed joint with the best possible flow characteristics.
Nickel also increases the toughness of the brazed joint.
A good brazed joint is identified as a pore and crack free joint with a homogenous microstructure.
Excess flux requires more significant cleaning of the brazed joint.
The cross section área of the brazed joint was investigated in Light Optical Microscope.
During cooling below the solidus temperature a solid brazed joint is formed.
No, a brazed joint will not be strong enough.
These design criteria apply to each brazed joint in the structure.
See also
The illustrations below suggest a number of ways to spread the stress in a brazed joint.
The molten flux then protects the brazed joint during its cooling.
A lack of flux generates poor castability of the metal and holes in the brazed joint.
Example 6 Tensile test of brazed joint The original applied test plates were sliced into slices.
In the end, it boiled down to the failure of a single brazed joint.
Example 6 Tensile test of brazed joint The original applied test plates were cut into strips.
With preference, the first hermetically sealed joint formed during step c is a brazed joint.
When a brazed joint is used, the distal wire anchor 84 can be deleted.
Method for brazing parts made from a composite material, with anchoring of the brazed joint.
FIG . 3 is an enlarged view of a brazed joint with flux residue.
Addition of magnesium ( Mg ) will improve the mechanical strength of the brazed joint.
Collaring - Brazed joint.
In these examples, the second raised edges 40 are connected by a brazed joint.
FIG . 4 is an enlarged view of the brazed joint of FIG . 3 after anodizing.
In other words the sealing means between the header 10 and the manifold 11 comprise a brazed joint.
FIG . 4 is a view of the brazed joint of FIG . 2 following brazing residue removal.
The substantially pure water has substantially or entirely cleaned fluoro-compound residue 28 from brazed joint 26.
FIG . 3 illustrates an enlarged view of one example of brazed joint 28 of aluminum article 10.
Casing according to claim 6, characterized in that the first hermetically sealed joint ( 22 ) is a brazed joint.
Step 6, Cleaning the brazed joint.
You'll also be interested in:
Examples of using Brazed
Show more
The assembly is brazed in a single operation in a furnace
Note that the branched sections are brazed
The grains of powder are brazed to one another
Examples of using Joint
Show more
Joint investigation with other investigative bodies
Cooperative and joint activities of the conventions
Joint operations and investigations are being conducted frequently
