Examples of 'breaking load' in a sentence
Meaning of "breaking load"
Breaking load: Refers to the maximum load or force exerted on an object or material until it breaks or fails. It is a measure of the strength or durability of a structure, component, or substance. Breaking load is often determined through testing and is an important consideration in various fields, such as engineering, construction, and materials science
How to use "breaking load" in a sentence
Basic
Advanced
breaking load
Breaking load must not be less than.
St cable with a length of m and a breaking load of kN.
Breaking load and elongation to be agreed upon.
Nd cable with a length of m and a breaking load of kN.
Measure the breaking load of the first strap.
Elongation at half the knot breaking load.
Item width breaking load color.
The same applied to the elongation to breaking load.
Breaking load and extension of strips of woven textile fabric 직포 세편의파단하중및연장.
Technical characteristics and breaking load on rails.
Breaking load of each chain.
Measured aggregate breaking load.
Breaking load for anchorages.
By comparing the tilting or breaking load the measure of safety is determined.
Breaking load of rope.
See also
Guaranteed breaking load.
Breaking load of cable in kN.
Various embodiments have been tested on breaking load and fatigue resistance.
Rather than breaking load balancing by using a specific one.
These measures in particular make it possible to reinforce the breaking load of the carabiner.
Breaking load the actual area is taken to be the mean of the three tests.
Sizes and specifications will be as per breaking load and connectiong hardware gaps.
The sample is loaded, usually with a certain fraction of the breaking load.
Steel with interlocking Breaking load of main axis.
Moreover, a breaking load of each of the test beams was measured in the following manner.
Addition of the fibrillated acrylonitrile fiber enhances the breaking load of the preform.
Consequently, the loss in breaking load is reduced or even avoided.
The tension shall be increased until the strap breaks and the breaking load noted.
Table 2 shows the modulus and breaking load ratios at various temperatures.
Give only the mass, length and effective breaking load.
Thus the initial breaking load of the wires of the non-fatigued cables is measured.
By reducing the diameter of the load bearing assembly the breaking load will be reduced.
Thus the initial breaking load of the non-fatigued wires and cables is measured after decortication.
FMAX can be determined with the permissible breaking load FB of the chain used.
The required breaking load TS will be near the value given by the formula,.
Customer specially ordered products are available, such as special size or special breaking load.
Breaking load per longitudinal connection, KN.
Cables shall be made of steel, natural or synthetic fibre and have a sufficient breaking load.
CRind, Minimum breaking load of a rope of the first part.
Ratio = Load on the bar x Safety Coefficient of the cable / Breaking Load of the cable.
The breaking load of such a tendon is at least 35 kN.
Rd is the diametral tablet breaking load ( in MPa ).
However, the breaking load per cross-section is still rather low.
Initial load % of actual breaking load.
The breaking load shall be determined within 10 minutes of the strap 's removal from the water.
Initial load " v ol actual breaking load.
Breaking load per coupling cable, KN.
Specified characteristic strength or breaking load ( or equivalent nominal tensile strength ) ;.
The user must tension it using a minimum force of 1 % of its breaking load.
The specified characteristic strength or breaking load (or equivalent nominal tensile strength);.
You'll also be interested in:
Examples of using Breaking
Show more
We have some breaking election news coming in
We would have heard the china breaking
Monitored continuation or breaking off a business relationship
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
