Examples of 'breaking stress' in a sentence
Meaning of "breaking stress"
breaking stress: The act of alleviating or reducing stress levels, often through various coping mechanisms, activities, or relaxation techniques
How to use "breaking stress" in a sentence
Basic
Advanced
breaking stress
Improved hysteresis and breaking stress properties.
The breaking stress of joints shall be measured using a representative sample.
The value of the nominal breaking stress is given in MPa.
A balance has to be struck between macroporosity and breaking stress.
The hysteresis and breaking stress properties are improved.
Increase in the tear strength and in the breaking stress.
Higher breaking stress.
Seriously, was the exact moment breaking stress.
Flexural breaking stress σf.
Above a certain degree of orientation, both yield stress and breaking stress increase.
The breaking stress and jelly strength of the samples were measured.
With an identical breaking stress.
The breaking stress and the yield stress of the adhesives were then recorded.
As the macroporosity is increased so the breaking stress will reduce.
The breaking stress of each individual filament was calculated as the load per unit área.
See also
The result of measuring bone breaking stress against rat femurs is shown.
The breaking stress and the jelly strength of the food products obtained were measured.
The wing bones of bats have a slightly lower breaking stress point than those of birds.
The breaking stress in compression is obtained by calculation using the following formula, σc = ecr.
The equivalent compression breaking stress of the AOP is high.
PBAT also has excellent mechanical properties, notably in terms of elongation and of breaking stress.
The value given is the breaking stress of the elastomeric layer charged with benzalkonium chloride.
The fifth column gives the breaking stress in MPa ;.
The breaking stress of the hardened material was of the order of 50 MPa.
The measurements of elongation and of breaking stress were carried out following ASTM method TABLE.
MOR breaking stress higher than or equal to 30 MPa.
The decline in the breaking stress is very slight ;.
The breaking stress of a composite is normally expressed as follows: σ, . σ, ■ Vf.
When cooling was further continued, the breaking stress showed a rapid decrease.
Maximum breaking stress ( tensile force at which the hair breaks ).
FIG . 7 represents a correlation curve between the breaking stress and the quality factor.
Compressive breaking stress σc higher than or equal to 160 MPa.
The operation of point 10 is carried out and a breaking stress equal to 125 MPa is found.
However, the breaking stress was no longer greater than 130 MPa.
This measurement gives a breaking stress equal to 90 MPa.
The breaking stress is expressed in N/5 cm.
Control Breaking stress.
The breaking stress was expressed in N/5 cm.
Preferably the material has a breaking stress of more than 1 MPa, and preferably more than 2 MPa.
BS t is the breaking stress in the transverse direction, in N/5 cm ;.
You'll also be interested in:
Examples of using Breaking
Show more
We have some breaking election news coming in
We would have heard the china breaking
Monitored continuation or breaking off a business relationship
Examples of using Stress
Show more
Stress can trigger migraines quite easily
Very good for stress you know
Stress has always affected your hormones
