Examples of 'brush motor' in a sentence
Meaning of "brush motor"
A brush motor is a type of electric motor that uses brushes to transfer electrical current to the rotating armature, creating rotational motion. Brush motors are commonly used in applications where low cost and simplicity are more important than efficiency and precision, such as household appliances and power tools
How to use "brush motor" in a sentence
Basic
Advanced
brush motor
Suction fan and brush motor switch.
Brush motor overload protection electronic system.
Indicates the switch of the brush motor.
Faulty brush motor or worn carbon brushes.
It runs only when the brush motor is on.
The brush motor will stop automatically.
Pull either one or both triggers to activate brush motor.
Open circuit on brush motors or brush motor wiring.
Brush motor circuit breaker tripped.
Fan and brush motor relay.
Brush motor will not start until handle is lowered.
The sound of the brush motor will change slightly.
Brush motor does not operate.
This system works when the brush motor is overloaded.
Brush motor circuit breaker button is located at rear of control console.
See also
Circuit breaker will trip due to brush motor overload.
Brush motor circuit breakers will trip due to excessive overload on pad.
Motor brush motor.
Put a brush or pad driver under the brush motor plate.
The brush motor and the vacuum motor automatically turn off.
Dayton warm air hand dryer is powered by a universal brush motor.
If the brush motor keeps overloading consider using a different type of brush.
The drivetrain assembly may include a brush motor or a brushless motor.
Brush motor circuit breaker will trip due to excessive overload on pad.
Machine is equipped with a circuit breaker to protect brush motor from damage.
The brush motor circuit breakers may trip due to excessive brush pressure.
The water starts to flow automatically when the brush motor is activated.
Brush Motor and solution flow will activate when the traverse buttons are pushed.
Press the pedal to release the handle and start the brush motor.
The module will momentarily run the brush motor and then stop it quickly.
Operate this switch to switch on the suction fan and main and side brush motor.
The overload protector shuts off the brush motor if the floor brush becomes obstructed.
Putting the switch in the off position will also shut off the brush motor.
Brush motor carbon brush check and replacement 2.
The model is equipped with a circuit breaker to protect brush motor from damage.
To shut brush motor off, place brush position switch in up position.
This is used for supplying energy for the brush motor and the air blower.
If the brush motor circuit breaker should trip, it can not be reset immediately.
This measure extends Service life of the brush motor.
In practice, it is common to use a brush motor to achieve said competitive price.
Simple bidirectional control of one DC brush motor.
When upright, the power to the brush motor automatically shuts off.
As a result, most electric bikes now have a brush motor.
To prevent overheating, do not operate brush motor without vacuum motor running.
Brushless motor is a new product, its life performance is better than brush motor.
Take off the electric supply to the brush motor unplugging the battery connector 1.
To shut brush motor off, hold brush position switch in up position until actuator stops.
Take off the electric supply to the brush motor unplugging the batteries connector 1.
Brush motor circuit breaker button is located at rear of control console Figure 17.
Do not operate machine in red zone, floor damage and brush motor overload may result.
You'll also be interested in:
Examples of using Motor
Show more
Motor eye sensors attached to motion detectors
Use of gaseous fuels in motor vehicles continuing
Motor worked to hard drawing extra current
Examples of using Brush
Show more
Brush off accumulation of dust on the base
Arrange for a brush pass in the medinah
Brush occasionally with melted butter or margarine
