Examples of 'brush or pad' in a sentence
Meaning of "brush or pad"
brush or pad: Refers to two different tools or objects that can be used for a similar purpose, typically highlighting a choice between two options
How to use "brush or pad" in a sentence
Basic
Advanced
brush or pad
Brush or pad holder not properly in place.
The scrub brush or pad is worn.
Machine standing still while the brush or pad is.
Incorrect brush or pad for the application.
Easy to apply with brush or pad.
Lower the brush or pad and scrub the floor.
Do not store the machine with the brush or pad driver installed.
Lower the brush or pad and scrub the fl oor.
Disconnect the power cord from the electrical outlet before installing a brush or pad driver.
Always attach a brush or pad accessory.
After brush or pad is installed return machine to upright position.
Machine left sitting on brush or pad for extended.
Put a brush or pad driver under the brush motor plate.
Installing the brush or pad holder.
Turn the brush or pad counterclockwise to unlock and remove the brush.
See also
Apply with a good quality brush or pad applicator.
Make sure the brush or pad is in position and installed correctly.
Remove squeegee assembly, brush housing and brush or pad driver before loading.
Rinse the brush or pad with warm water and hang it up to dry.
Running the machine with a dry brush or pad no cleaning solution.
Turn the brush or pad driver clockwise until it disengages and lift off.
Push down on two sides of the brush or pad driver until the.
To lock the brush or pad into position, turn the brush or pad driver clockwise.
Poor scrubbing performance Worn brush or pad Rotate or replace brushes.
Wrong brush or pad type Consult Nilfisk-Advance.
Remove the brush or pad holder.
Turn the brush or pad holder counter-clockwise ( to the left ) until it locks 6.
Push down on two sides of the brush or pad driver until the gimbals release.
Pull downward on the brush or pad until it releases from the fl ex plates.
Pull downward on the brush or pad until it releases from the flex plates.
Always remove the brush or pad driver when the machine is not in use.
The deposit is applied with a brush or pad and gives a thick deposit with low adhesion.
To connect a brush or pad driver, follow this procedure.
To install the brush or pad driver, follow this procedure.
To install the brush or pad on the machine, follow this procedure.
To remove the brush or pad from the machine, follow this procedure.
You'll also be interested in:
Examples of using Pad
Show more
The pad has to be replaced in that case
Brake lining or brake pad method of attachment
Launch pad runs completely on internal power
Examples of using Brush
Show more
Brush off accumulation of dust on the base
Arrange for a brush pass in the medinah
Brush occasionally with melted butter or margarine
