Examples of 'brushroll' in a sentence
Meaning of "brushroll"
brushroll (verb) - to clean or sweep a surface using a rolling brush, typically used in vacuum cleaners
How to use "brushroll" in a sentence
Basic
Advanced
brushroll
Place belt in area of brushroll without bristles.
Brushroll will not spin in upright position.
Lift out the brushroll and clean it.
Lay the vacuum flat to expose brushroll.
Slide brushroll end cap out to remove.
To remove and replace front belt or brushroll.
Remove brushroll by lifting up and out of the cleaner.
Cleaning the powerhead to access the brushroll.
Pull out the brushroll and remove debris.
Turn on the power to the rotating brushroll.
Lift out brushroll and remove old belt.
Do not add lubricant to motor bearings or brushroll.
Uses a rotating bristle brushroll for agitation.
The brushroll may need to be cleaned.
Clear obstruction from brushroll and turn unit on.
See also
If the brushroll becomes blocked or jammed for any.
Place new belt around brushroll motor pulley.
Brushroll continues to turn while product is.
Cleaner must be in its upright position to raise brushroll.
Push the brushroll release button.
High suction with motorized brushroll.
Make sure brushroll is completely in compartment.
Low suction with motorized brushroll.
Brushroll continues to rotate when in the upright position.
Power nozzle agitator brushroll will not run.
Your brushroll may not be activated.
Slide other end of belt around end of brushroll.
Pull the brushroll out from this end.
Remove hair and threads from brushroll periodically.
The brushroll could suddenly restart.
Push tabs towards the brushroll and lift up.
A brushroll is mounted on the base assembly.
Remove any obstructing objects from the brushroll.
Rotate brushroll manually to make sure belt is properly aligned.
If large debris is clogged in the brushroll.
Rotate brushroll manually to make sure belt is not twisted.
Bare floor cleaningturn brushroll off.
Brushroll continues to turn while product is turned on and handle is in.
Place other end of the belt around the brushroll.
Brushroll must reach carpet for best cleaning results.
Thread new belt around motor shaft then brushroll.
Brushroll could be turned off or the belt could be broken.
Reassemble the remainder of brushroll and secure into the base.
Brushroll will not rotate while handle is in upright position.
Remove debris from brushroll and push motor reset button.
This vacuum cleaner creates suction and contains a revolving brushroll.
If the brushroll indicator light on the floor nozzle turns.
Remove any debris from this area and the brushroll.
Both brushroll speeds provide the same suction power.
Guide belt thru the hole toward the brushroll area.
